RationalDMIS快速从测量点属性中定义变量（快速触测点取值）

   可以从测点属性中创建双精度变量，选中需要的参数，右键会弹出“赋值为变量"；

MODE/PROG,MAN

F(CIR1)=FEAT/CIRCLE,INNER,CART,-0.0157,-0.0251,-4.3574,0.0000,0.0000,1.0000, 68.0000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(CIR1), 4

  GOTO/CART,    30.6021,  29.9138, 11.6426

  GOTO/CART,    30.9843,  -0.0251, 11.6426

  GOTO/CART,    30.9843,  -0.0251, 10.6426

  PTMEAS/CART,  33.9843,  -0.0251, -4.3574, -1.0000,  0.0000, 0.0000

  GOTO/CART,    28.6245, -11.8883, -4.3574

  GOTO/CART,    21.9046, -21.9454, -4.3574

  GOTO/CART,    11.8475, -28.6654, -4.3574

  PTMEAS/CART,  -0.0157, -34.0251, -4.3574,  0.0000,  1.0000, 0.0000

  GOTO/CART,   -11.8789, -28.6654, -4.3574

  GOTO/CART,   -21.9360, -21.9454, -4.3574

  GOTO/CART,   -28.6560, -11.8883, -4.3574

  PTMEAS/CART, -34.0157,  -0.0251, -4.3574,  1.0000,  0.0000, 0.0000

  GOTO/CART,   -28.6560,  11.8381, -4.3574

  GOTO/CART,   -21.9360,  21.8952, -4.3574

  GOTO/CART,   -11.8789,  28.6152, -4.3574

  PTMEAS/CART,  -0.0157,  33.9749, -4.3574,  0.0000, -1.0000, 0.0000

  GOTO/CART,    -0.0157,  30.9749, 10.6426

ENDMES

DECL/COMMON,REAL,CIR1_1_AX,CIR1_1_AY,CIR1_1_AZ

CIR1_1_AX = OBTAIN/FA(CIR1)[1],2

CIR1_1_AY = OBTAIN/FA(CIR1)[1],3

CIR1_1_AZ = OBTAIN/FA(CIR1)[1],4

DECL/COMMON,REAL,CIR1_2_AX,CIR1_2_AY,CIR1_2_AZ

CIR1_2_AX = OBTAIN/FA(CIR1)[2],2

CIR1_2_AY = OBTAIN/FA(CIR1)[2],3

CIR1_2_AZ = OBTAIN/FA(CIR1)[2],4

DECL/COMMON,REAL,CIR1_3_AX,CIR1_3_AY,CIR1_3_AZ

CIR1_3_AX = OBTAIN/FA(CIR1)[3],2

CIR1_3_AY = OBTAIN/FA(CIR1)[3],3

CIR1_3_AZ = OBTAIN/FA(CIR1)[3],4

DECL/COMMON,REAL,CIR1_4_AX,CIR1_4_AY,CIR1_4_AZ

CIR1_4_AX = OBTAIN/FA(CIR1)[4],2

CIR1_4_AY = OBTAIN/FA(CIR1)[4],3

CIR1_4_AZ = OBTAIN/FA(CIR1)[4],4

  注意：弹出菜单对鼠标位置敏感。理论列位置将取得理论测点，实际列将取得实际测点；