即将直播：midas MeshFree模具吊装工况分析（4月11日）

详细信息

作者优秀: 优秀教师/意见领袖/博士学历/特邀专家/独家讲师
平台推荐: 内容稀缺

6月前浏览5843

导读：第12届三维金属材料形成过程的数值模拟国际会议，在加拿大多伦多举办。NUMISHEET会议是板材成形成形过程数值模拟领域最具影响力的国际会议，也是板材成形数值仿真领域最杰出的专家聚会交流思想和讨论相关技术的论坛在会议上，起亚技术经理“Yoon Ki-hoon”给大家分享MeshFree在模具冲压上的应用。

由仿真秀主办的2024年汽车设计仿真专题报告会第三期将邀请MIDAS IT 中国区机械事业部仿真软件技术负责人梁华老师做《midas MeshFree模具吊装工况分析》带来midas MeshFree在模具冲压上的应用。详情见后文，希望对汽车设计仿真工程师、理工科学子和教师有所帮助，详情见后文。

一、midas MeshFree模具吊装公开课

为了帮助用户掌握midas MeshFree摸具吊装工况分析能力，由仿真秀主办的2024年汽车设计仿真专题报告会第三期将邀请MIDAS IT中国区机械事业部仿真软件技术负责人梁华老师做《midas MeshFree模具吊装工况分析》，内容包括：midas MeshFree的开发背景、算法特点和功能优势；midas MeshFree材料、边界和荷载设置方法；midas MeshFree模具吊装分析要点和基本流程；结果趋势判断、误差分析和精度控制。以下是直播安排

2024汽车设计仿真（三）midas MeshFree模具吊装工况分析-仿真秀直播

扫码观看直播和回放

二、MeshFree in Toronto

MeshFree in Toronto (NUMISHEET2022)

The 12th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2022), July 10–14, 2022 • Sheraton Centre Toronto Hotel • Toronto, Ontario, Canada

Let's listen to it directly through Yoon Ki-hoon, Manager of the Kia Molding Technology Department, who contributed and presented the paper!!

I gave a presentation at a session on the topic of Multiscale modeling of deformation, and it was interesting to see 30-40 people from national and international universities as well as those in charge of numerical analysis and corporate representatives. Let me introduce you to the announcement。

Recently, consumer car preferences have changed dramatically, accelerating plans to produce a variety of car models. For this reason, most automotive engineers are constantly called upon to develop new technologies that can reduce the time it takes to develop new models and produce customizations, and they want to introduce simultaneous engineering engineering into the new model development process.

Mold engineers are likewise attempting to shorten mold development time by eliminating additional calibration airborne. Usually in structural analysis, molds are considered rigid to simplify engineering difficulties. However, in practice, the panel forming force causes contact pressure on the mold shape surface, and that pressure causes elastic deformation in the mold.

Figure 2. Mold model in which elastic deformation occurs

This is the main cause that prevents mold engineers from predicting mold deformability. Due to this mold deformation, additional springback analysis and manual work are essential after the gold ball. To shorten this additional process, it is important to accurately predict where and how much the mold will deform. Through the analysis shown in Figure 1, the exact amount of compensation should be calculated and reflected in the mold design phase.

Previous studies have proposed a variety of approaches to predict deformation and have demonstrated the effectiveness of molded structural East Sea. Molding structure integration simulations were performed, reducing mold making costs and increasing productivity. By linking the molding analysis to the structural analysis, the springback for the fender panel was able to accurately predict.

Figure 3. Structural analysis model of mold using midas MeshFree from IBM

Conclusion and future plans

In this study, a molded-structural East Sea was applied to a press mold and the mold deformation distribution was obtained as a final analysis. The results of this analysis were found to be similar to the values measured in the actual mold.

Figure 4. Mold deformation analysis results using MeshFree-1

Figure 5. Mold Deformation Analysis Results Using MeshFree-2

Figure 6. Mold deformation analysis results using MeshFree-3

In addition, we were able to demonstrate that the proposed mold deformation analysis methodology resulted in a significant reduction in turnaround time and established a process that allowed mold design and deformation analysis to be performed simultaneously.

Figure 7. Mold deformation analysis time for improved processes with reduced compared to traditional processes

The improved process can be utilized practically in the mold design business without requiring FEM specific expertise. In particular, if a mold manufacturer needs a fast and accurate analysis, but it is difficult to hire an analysis expert, it seems to be a cost-effective method. In the future, this analysis process will be extended to all molds that are developed in the future.

（完）

来源：仿真秀App

ACT Adams Deform 汽车 UG 新能源 UM 材料 NVH 控制模具

著作权归作者所有，欢迎分享，未经许可，不得转载

首次发布时间：2024-04-11