RationalDMIS间距面功能全面超越PCDMIS

提示：Mode/Pro,Man模式下应用间距面。

  注意： 

（1）DMIS中安全平面（间距面）只在"AUTO"模式下起作用。需要在“程序设置”--勾选“MODE/PROG，MAN下应用间距面”，这项兼容性改变使得“安全平面”，在PROG模式下也可以起作用。

（2）测量操作区，测量设置窗口“清除平面设置”可以设置自动测量元素测量前后的安全位置（PC-DMIS“两者”，“前”，“后”）。

     Mode/Pro，Man模式下应用间距面：勾选后在程序模式下会自动调用间距面，间距面的位置根据理论位置来计算；

     Crete PTMEAS with Apprch/Retrct：设置为是，记录的DMIS程序中PTMEAS语句中会有接近回退参数；Creat MEAS with Clear Surface setting：设置为是，记录的DMIS程序中MEAS语句中会有安全平面设置参数；

PC DMIS  和RationalDMIS间距面功能对比在文章下方：

清除平面设置解读：

用来设置测量前和测量后使用不同的安全平面来抬高；

有3个设置选项：无、关闭、间距面，窗口内可以拖放平面：

控制如下功能：

A、 MEAS语句的清除平面设置

MEAS/POINT, F(PT13), 1, CLRSRF, F(PLN2), 2.00, CLRSRF, F(PLN2), 20.00

B、从Cad上选取并测量调用此设置；

C、从元素数据区自动测量调用此设置；

D、RMEAS/VECBLD支持‘创建MEAS时增加清除平面设置’设置；

例如点: RMEAS/POINT, F(PT1), 1, VECBLD, 4.000, 3, CLRSRF, 15.0, CLRSRF, 26.0

DMISMN/'Created by [深圳力合精密装备科技有限公司-090118] on 星期三, 七月 18, 2018', 4.0

UNITS/MM, ANGDEC, MMPS

WKPLAN/XYPLAN

PRCOMP/ON

TECOMP/ON

FLY/1.000000

MODE/PROG, MAN

SNSET/APPRCH, 2.000000

SNSET/RETRCT, 2.000000

SNSET/DEPTH, 0.000000

SNSET/SEARCH, 10.000000

SNSET/CLRSRF, 10.000000

RECALL/D(MCS)

SNSLCT/S(ROOTSN1)

GEOALG/BF, LSTSQR

GEOALG/ANGLB, DEFALT

GEOALG/CIRCLE, LSTSQR

GEOALG/ARC, LSTSQR

GEOALG/PLANE, LSTSQR

$$

$$

MODE/PROG,MAN

F(PT1)=FEAT/POINT,CART,9.292552,80.861908,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(PT1), 1, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 9.292552,80.861908,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(PT2)=FEAT/POINT,CART,8.651951,28.114450,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(PT2), 1, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 8.651951,28.114450,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(PT3)=FEAT/POINT,CART,70.848228,23.717142,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(PT3), 1, CLRSRF, 20.000000, CLRSRF, 10.000000

  PTMEAS/CART, 70.848228,23.717142,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(PT4)=FEAT/POINT,CART,85.526016,56.336372,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(PT4), 1, CLRSRF, 10.000000, CLRSRF, 20.000000

  PTMEAS/CART, 85.526016,56.336372,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(CIR1)=FEAT/CIRCLE,INNER,CART,40.000000,55.000000,32.000000,0.000000,0.000000,1.000000, 45.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(CIR1), 4, CLRSRF, 15.000000, CLRSRF, 30.000000

  GOTO/CART,   40.000000, 74.500000, 43.000000

  GOTO/CART,   59.500000, 55.000000, 43.000000

  GOTO/CART,   59.500000, 55.000000, 42.000000

  PTMEAS/CART, 62.500000, 55.000000, 32.000000, -1.000000,  0.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   58.015651, 47.537673, 32.000000

  GOTO/CART,   53.788582, 41.211418, 32.000000

  GOTO/CART,   47.462327, 36.984349, 32.000000

  PTMEAS/CART, 40.000000, 32.500000, 32.000000,  0.000000,  1.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   32.537673, 36.984349, 32.000000

  GOTO/CART,   26.211418, 41.211418, 32.000000

  GOTO/CART,   21.984349, 47.537673, 32.000000

  PTMEAS/CART, 17.500000, 55.000000, 32.000000,  1.000000,  0.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   21.984349, 62.462327, 32.000000

  GOTO/CART,   26.211418, 68.788582, 32.000000

  GOTO/CART,   32.537673, 73.015651, 32.000000

  PTMEAS/CART, 40.000000, 77.500000, 32.000000,  0.000000, -1.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   40.000000, 74.500000, 42.000000

ENDMES

F(CIR2)=FEAT/CIRCLE,INNER,CART,56.000000,27.287187,32.000000,-0.000000,-0.000000,1.000000, 10.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(CIR2), 4, CLRSRF, 10.000000, CLRSRF, 40.000000

  GOTO/CART,   56.000000, 29.287187, 43.000000

  GOTO/CART,   58.000000, 27.287187, 43.000000

  GOTO/CART,   58.000000, 27.287187, 42.000000

  PTMEAS/CART, 61.000000, 27.287187, 32.000000, -1.000000, -0.000000, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 56.000000, 22.287187, 32.000000,  0.000000,  1.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 51.000000, 27.287187, 32.000000,  1.000000,  0.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 56.000000, 32.287187, 32.000000,  0.000000, -1.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   56.000000, 29.287187, 42.000000

ENDMES

PC-DMIS间距面功能三种如下：

RationalDMIS间距面功能四种，对PC DMIS间距面功能全覆盖: