首页/文章/ 详情

RationalDMIS间距面功能详解

1年前浏览275

提示:
         程序设置-DMIS设置-兼容性-MODE/PROG,MAN下应用间距面-清除平面

   Mode/Pro,Man模式下应用间距面:勾选后在程序模式下会自动调用间距面,间距面的位置,根据理论位置来计算;


Crete PTMEAS with Apprch/Retrct(创建PTMEAS时增加Apprch/Retrct

                 设置为是,记录的DMIS程序中PTMEAS语句中会有接近回退参数


Creat MEAS with Clear Surface setting(创建MEAS时增加清除平面设置):

                设置为是,记录的DMIS程序中MEAS语句中会有安全平面设置参数;


小提示:
    测量操作区---测量操作面板切换到“测量设置窗”----“清除平面设置”


用来设置测量前和测量后使用不同的安全平面来抬高;

3个设置选项:无、关闭、间距面,窗口内可以拖放平面:


控制如下功能:

A MEAS语句的清除平面设置

F(间距面圆-6)=FEAT/CIRCLE,OUTER,CART,40.000000,55.000000,27.000000,0.000000,0.000000,1.000000, 30.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(间距面圆-6), 4, CLRSRF, 20.000000, CLRSRF, 20.000000

B、从Cad上选取并测量调用此设置;

F(点-6)=FEAT/POINT,CART,66.827655,85.491532,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(点-6), 1, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 66.827655,85.491532,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

C、从元素数据区自动测量调用此设置;


DRMEAS/VECBLD支持‘创建MEAS时增加清除平面设置’设置;


SNSET/APPRCH, 2.0000

SNSET/RETRCT, 2.0000

SNSET/DEPTH, 2

SNSET/SEARCH, 10.0000

SNSET/CLRSRF, 10.0000

F(间距面圆-7)=FEAT/CIRCLE,INNER,CART,40.000000,55.000000,35.000000,0.000000,-0.000000,1.000000, 45.000000

$$ Measurement points are created through nominal points

RMEAS/CIRCLE, F(间距面圆-7), 4, VECBLD, 3.000000, 3, CLRSRF, 20.000000, CLRSRF, 20.000000

$$ Senset adjustment for independent VECBLD sampling control

  SNSET/APPRCH, 10.000000

  SNSET/RETRCT, 10.000000

  PTMEAS/CART, 26.062719, 37.336416, 33.000000,  0.619435,  0.785048,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   34.698767, 36.234422, 33.000000

  GOTO/CART,   42.283575, 35.634172, 33.000000

  GOTO/CART,   49.520730, 37.982195, 33.000000

  PTMEAS/CART, 57.663584, 41.062719, 33.000000, -0.785048,  0.619435,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   58.765578, 49.698767, 33.000000

  GOTO/CART,   59.365828, 57.283575, 33.000000

  GOTO/CART,   57.017805, 64.520730, 33.000000

  PTMEAS/CART, 53.937281, 72.663584, 33.000000, -0.619435, -0.785048, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   45.301233, 73.765578, 33.000000

  GOTO/CART,   37.716425, 74.365828, 33.000000

  GOTO/CART,   30.479270, 72.017805, 33.000000

  PTMEAS/CART, 22.336416, 68.937281, 33.000000,  0.785048, -0.619435, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000


ENDMES

对间距面参数快速修改方法: 

程序数据区-DMIS功能工具条-编辑当前行
编辑当前行:用户需要先选择要编辑的当前行,然后点击此图标;

并不是所有的语句都可以进行编辑;

  支持编辑关键字MEAS,  PTMEAS,  GOTO,  RMEAS, $$, TEXT/OUTFIL, TEXT/OPER;

MEAS编辑窗口可以设置两个间距平面。第一个间距平面控制测量前,第二个控制测量后,见下图:

点击应用后会产生语句:MEAS/CIRCLE, F(间距面圆-6), 4, CLRSRF, 20.000000, CLRSRF, 20.000000

PTMEAS编辑窗口:除了可以编辑PTMEASXYZIJK,还可以编辑此测量点的接近/回退参数。

  PTMEAS/CART, 30.708480, 43.224277, 27.000000, -0.619435, -0.785048,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

Goto编辑窗口:


RMEAS编辑窗口:

支持如下语句编辑:

  RMEAS/CIRCLE, F(间距面圆-7), 4, VECBLD, 3.000000, 3, CLRSRF, 20.000000, CLRSRF, 20.000000

RMEAS/CPARLN, F(键槽1), 6, VECBLD, 3.000000, 3, CLRSRF, 20.000000, CLRSRF, 20.000000


RMEAS/POINT, F(点-8), 1, VECBLD, 3.000000, 3, CLRSRF, 20.000000, CLRSRF, 20.000000

RMEAS/EDGEPT, F(EP1), 1, VECBLD, 3.000000, 3, 3.300000, CLRSRF, 20.000000, CLRSRF, 20.000000


其他语句编辑:

$$

TEXT/OUTFIL

TEXT/OPER

以下关键字不支持“编辑当前行,功能,因为这些语句会改变语法执行器内部状态。

CALL:MACRO:ENDMAC:DO:ENDDO:SELECT:CASE:ENDCAS:DFTCAS:IE:ELSE:ENDIE:ASSIGN

DMISMN/'Created by [深圳力合精密装备科技有限公司-090118] on 星期六, 七月 21, 2018', 4.0

UNITS/MM, ANGDEC, MMPS

WKPLAN/XYPLAN

PRCOMP/ON

TECOMP/ON

FLY/1.000000

MODE/PROG, MAN

SNSET/APPRCH, 2.000000

SNSET/RETRCT, 2.000000

SNSET/DEPTH, 0.000000

SNSET/SEARCH, 10.000000

SNSET/CLRSRF, 20.000000

RECALL/D(MCS)

SNSLCT/S(L20_D3.0)

GEOALG/BF, LSTSQR

GEOALG/ANGLB, DEFALT

GEOALG/CIRCLE, LSTSQR

GEOALG/ARC, LSTSQR

GEOALG/PLANE, LSTSQR

$$

$$

MODE/MAN

F(PLN1)=FEAT/PLANE,CART,53.328588,46.119123,35.000000,0.000000,0.000000,1.000000

$$ Measurement points are created through actual points

MEAS/PLANE, F(PLN1), 4

  PTMEAS/CART,  10.629248, 78.337868, 35.000000, 0.000000, 0.000000, 1.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART,   7.432619, 32.388851, 35.000000, 0.000000, 0.000000, 1.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART,  78.567719, 20.237173, 35.000000, 0.000000, 0.000000, 1.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 116.684769, 53.512600, 35.000000, 0.000000, 0.000000, 1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

D(CRD1) = DATSET/FA(PLN1), ZDIR

D(CRD1) = TRANS/ZORIG, FA(PLN1)

DMESW/COMAND,'OUTPUT/MAP,CRD,D(CRD1),D(CADM_1)'

D(CRD2) = TRANS/ZORIG, -35

F(LN1)=FEAT/LINE,BND,CART,11.624844,0.000000,15.859651,63.527214,0.000000,16.692308,0.000000,-1.000000,0.000000

$$ Measurement points are created through actual points

MEAS/LINE, F(LN1), 2

  PTMEAS/CART, 11.624844, 0.000000, 15.859651, 0.000000, -1.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 63.527214, 0.000000, 16.692308, 0.000000, -1.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(LN2)=FEAT/LINE,BND,CART,0.000000,16.422115,31.573641,0.000000,85.889282,29.331316,-1.000000,0.000000,0.000000

$$ Measurement points are created through actual points

MEAS/LINE, F(LN2), 2

  PTMEAS/CART, 0.000000, 16.422115, 31.573641, -1.000000, 0.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 0.000000, 85.889282, 29.331316, -1.000000, 0.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(LN_PROJ1)=FEAT/LINE,BND,CART,11.624844,0.000000,35.000000,63.527214,0.000000,35.000000,0.000000,0.000000,1.000000

CONST/LINE,F(LN_PROJ1),PROJLI,FA(LN1),FA(PLN1)

F(LN_PROJ2)=FEAT/LINE,BND,CART,0.000000,16.422115,35.000000,0.000000,85.889282,35.000000,0.000000,0.000000,1.000000

CONST/LINE,F(LN_PROJ2),PROJLI,FA(LN2),FA(PLN1)

F(PT_INTER1)=FEAT/POINT,CART,0.000000,0.000000,35.000000,0.000000,0.000000,1.000000

CONST/POINT,F(PT_INTER1),INTOF,FA(LN_PROJ1),FA(LN_PROJ2)

D(CRD3) = ROTATE/ZAXIS, FA(LN_PROJ1), XDIR

D(CRD4) = TRANS/XORIG, FA(PT_INTER1), YORIG, FA(PT_INTER1)

$$ Set.CAD2PCS.CADM_1

$$ Set.CADViewCenter.CADM_1

$$

TEXT/OPER, '请将测头移动到安全位置!!!'

GOTO/0.000000, 0.000000, 150.000000

$$

MODE/PROG,MAN

SNSET/APPRCH, 2

SNSET/RETRCT, 2

SNSET/DEPTH, 0.0000

SNSET/SEARCH, 10.0000

SNSET/CLRSRF, 20

F(PLN2)=FEAT/PLANE,CART,31.250000,46.787796,35.000000,0.000000,0.000000,1.000000

$$ Measurement points are created through nominal points

MEAS/PLANE, F(PLN2), 7

  GOTO/CART,    6.728150, 23.314255,  56.497810

  PTMEAS/CART,  6.728150, 23.314255,  35.000000, 0.000000, 0.000000, 1.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 41.341267, 22.089069,  35.000000, 0.000000, 0.000000, 1.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 74.815788, 20.114958,  35.000000, 0.000000, 0.000000, 1.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 84.818367, 47.525963,  35.000000, 0.000000, 0.000000, 1.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 61.832573, 72.791603,  35.000000, 0.000000, 0.000000, 1.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 39.357967, 85.530479,  35.000000, 0.000000, 0.000000, 1.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART,  9.367297, 85.602402,  35.000000, 0.000000, 0.000000, 1.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,    0.000000,  0.000000, 200.000000

ENDMES

F(LN3)=FEAT/LINE,BND,CART,0.000000,0.000000,16.847862,95.414119,0.000000,16.847862,0.000000,-1.000000,0.000000

$$ Measurement points are created through nominal points

MEAS/LINE, F(LN3), 3

  GOTO/CART,    0.000000, -21.497785, 200.000003

  GOTO/CART,    5.000000, -21.497810,  16.847865

  PTMEAS/CART,  5.000000,   0.000000,  16.847862, 0.000000, -1.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 33.471373,   0.000000,  16.847862, 0.000000, -1.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 61.942746,   0.000000,  16.847862, 0.000000, -1.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

GOTO/61.942746, -3.497810, 66.847862

F(LN4)=FEAT/LINE,BND,CART,0.000000,9.694898,29.715612,0.000000,123.883893,29.715612,-1.000000,0.000000,0.000000

$$ Measurement points are created through nominal points

MEAS/LINE, F(LN4), 3

  GOTO/CART,   -21.497810, -3.497810, 66.847862

  GOTO/CART,   -21.497810, 14.694898, 29.715612

  PTMEAS/CART,   0.000000, 14.694898, 29.715612, -1.000000, 0.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART,   0.000000, 49.424563, 29.715612, -1.000000, 0.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,     0.000000, 49.424563, 50.000000

  GOTO/CART,     0.000000, 84.154228, 50.000000

  PTMEAS/CART,   0.000000, 84.154228, 29.715612, -1.000000, 0.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

GOTO/-3.497810, 84.154228, 79.715612

F(LN_PROJ3)=FEAT/LINE,BND,CART,0.000000,0.000000,35.000000,95.414119,0.000000,35.000000,0.000000,0.000000,1.000000

CONST/LINE,F(LN_PROJ3),PROJLI,FA(LN3),FA(PLN2)

F(LN_PROJ4)=FEAT/LINE,BND,CART,0.000000,9.694898,35.000000,0.000000,123.883893,35.000000,0.000000,0.000000,1.000000

CONST/LINE,F(LN_PROJ4),PROJLI,FA(LN4),FA(PLN2)

F(PT_INTER2)=FEAT/POINT,CART,0.000000,0.000000,35.000000,0.000000,0.000000,1.000000

CONST/POINT,F(PT_INTER2),INTOF,FA(LN_PROJ3),FA(LN_PROJ4)

D(CRD5) = DATSET/FA(PLN2), ZDIR, ZORIG, FA(LN_PROJ3), XDIR, FA(PT_INTER2), XORIG

D(CRD5) = TRANS/ZORIG, -35, YORIG, FA(PT_INTER2), XORIG, -0

$$ Set.CAD2PCS.CADM_1

$$ Set.CADViewCenter.CADM_1

$$

$$

TEXT/OPER, 'DCC模式开始!!!'

$$

MODE/PROG,MAN

SNSET/APPRCH, 2

SNSET/RETRCT, 2

SNSET/DEPTH, 0.0000

SNSET/SEARCH, 10.0000

SNSET/CLRSRF, 20

F(PT1)=FEAT/POINT,CART,9.153963,83.857872,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(PT1), 1, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 9.153963,83.857872,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(PT2)=FEAT/POINT,CART,95.335411,83.923363,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(PT2), 1, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 95.335411,83.923363,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(PT3)=FEAT/POINT,CART,85.898102,49.555840,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(PT3), 1, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 85.898102,49.555840,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(PT4)=FEAT/POINT,CART,82.301346,15.334501,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(PT4), 1, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 82.301346,15.334501,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(PT5)=FEAT/POINT,CART,13.660213,21.371893,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(PT5), 1, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 13.660213,21.371893,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

GOTO/13.660213, 21.371893, 106.497810

SNSLCT/S(L20_D3.0_A90_B180)

F(PT6)=FEAT/POINT,CART,103.287430,5.000000,6.090807,0.000000,-1.000000,0.000000

MEAS/POINT, F(PT6), 1, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 103.287430,5.000000,6.090807,0.000000,-1.000000,0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

GOTO/103.287430, -16.498112, 156.090807

SNSLCT/S(L20_D3.0)

F(PT7)=FEAT/POINT,CART,83.706894,57.660770,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(PT7), 1, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 83.706894,57.660770,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

SNSLCT/S(L20_D3.0_A90_B180)

F(PT8)=FEAT/POINT,CART,104.900821,5.000000,21.858184,-0.000000,-1.000000,0.000000

MEAS/POINT, F(PT8), 1, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 104.900821,5.000000,21.858184,-0.000000,-1.000000,0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

 

GOTO/104.925197, -16.501240, 171.843030

SNSLCT/S(L20_D3.0)

F(点-1)=FEAT/POINT,CART,9.015544,21.837879,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(点-1), 1, CLRSRF, 10.000000, CLRSRF, 35.000000

  PTMEAS/CART, 9.015544,21.837879,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(点-2)=FEAT/POINT,CART,71.963341,20.638522,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(点-2), 1, CLRSRF, 10.000000, CLRSRF, 35.000000

  PTMEAS/CART, 71.963341,20.638522,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(点-3)=FEAT/POINT,CART,95.816481,24.338546,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(点-3), 1, CLRSRF, 10.000000, CLRSRF, 35.000000

  PTMEAS/CART, 95.816481,24.338546,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(点-4)=FEAT/POINT,CART,100.055992,82.787680,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(点-4), 1, CLRSRF, 10.000000, CLRSRF, 35.000000

  PTMEAS/CART, 100.055992,82.787680,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(点-5)=FEAT/POINT,CART,44.151467,86.572292,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(点-5), 1, CLRSRF, 10.000000, CLRSRF, 35.000000

  PTMEAS/CART, 44.151467,86.572292,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

SNSET/APPRCH, 2.0000

SNSET/RETRCT, 2.0000

SNSET/DEPTH, 0.0000

SNSET/SEARCH, 10.0000

SNSET/CLRSRF, 20.0000

 

F(圆-1)=FEAT/CIRCLE,INNER,CART,40.000000,55.000000,32.000000,0.000000,0.000000,1.000000, 45.000000

MEAS/CIRCLE, F(圆-1), 4

  PTMEAS/CART, 62.500000, 55.000000, 32.000000, -1.000000,  0.000000,  0.000000

  GOTO/ARC,    40.000000, 74.002190, 32.000000, 53.436578, 68.436578, 32.000000

  PTMEAS/CART, 40.000000, 77.500000, 32.000000, -0.000000, -1.000000,  0.000000

  GOTO/ARC,    20.997810, 55.000000, 32.000000, 26.563422, 68.436578, 32.000000

  PTMEAS/CART, 17.500000, 55.000000, 32.000000,  1.000000, -0.000000,  0.000000

  GOTO/ARC,    40.000000, 35.997810, 32.000000, 26.563422, 41.563422, 32.000000

  PTMEAS/CART, 40.000000, 32.500000, 32.000000,  0.000000,  1.000000, -0.000000

ENDMES

GOTO/40.011604, 35.994994, 131.994930

F(圆-2)=FEAT/CIRCLE,INNER,CART,40.000000,55.000000,27.000000,0.000000,0.000000,1.000000, 20.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(圆-2), 4, CLRSRF, 20.000000, CLRSRF, 30.000000

  GOTO/CART,   46.502190, 55.000000, 48.497810

  GOTO/CART,   46.502190, 55.000000, 47.000000

  PTMEAS/CART, 50.000000, 55.000000, 27.000000, -1.000000, -0.000000, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   46.007241, 52.511719, 27.000000

  GOTO/CART,   44.597743, 50.402257, 27.000000

  GOTO/CART,   42.488281, 48.992759, 27.000000

  PTMEAS/CART, 40.000000, 45.000000, 27.000000,  0.000000,  1.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   37.511719, 48.992759, 27.000000

  GOTO/CART,   35.402257, 50.402257, 27.000000

  GOTO/CART,   33.992759, 52.511719, 27.000000

  PTMEAS/CART, 30.000000, 55.000000, 27.000000,  1.000000,  0.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   33.992759, 57.488281, 27.000000

  GOTO/CART,   35.402257, 59.597743, 27.000000

  GOTO/CART,   37.511719, 61.007241, 27.000000

  PTMEAS/CART, 40.000000, 65.000000, 27.000000, -0.000000, -1.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   40.000000, 61.502190, 47.000000

ENDMES

F(圆-3)=FEAT/CIRCLE,OUTER,CART,40.000000,55.000000,27.000000,0.000000,0.000000,1.000000, 30.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(圆-3), 4, CLRSRF, 20.000000, CLRSRF, 30.000000

  GOTO/CART,   40.011918, 61.504771, 48.497810

  GOTO/CART,   40.033893, 73.497779, 48.497810

  PTMEAS/CART, 40.027484, 69.999975, 27.000000,  0.001800,  0.999998, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   26.944061, 68.103870, 27.000000

  PTMEAS/CART, 25.000025, 55.027484, 27.000000, -0.999998,  0.001800, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   26.896130, 41.944061, 27.000000

  PTMEAS/CART, 39.972516, 40.000025, 27.000000, -0.001800, -0.999998,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   53.055939, 41.896130, 27.000000

  PTMEAS/CART, 54.999975, 54.972516, 27.000000,  0.999998, -0.001800,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

GOTO/58.510348, 54.968158, 126.993898

$$ Measurement points are created through nominal points

F(圆-4)=FEAT/CIRCLE,INNER,CART,8.000000,55.000000,32.000000,0.000000,0.000000,1.000000, 10.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(圆-4), 4, CLRSRF, 20.000000, CLRSRF, 30.000000

  PTMEAS/CART, 12.999999, 54.996926, 32.000000, -1.000000,  0.000615, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART,  8.003074, 59.999999, 32.000000, -0.000615, -1.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART,  3.000001, 55.003074, 32.000000,  1.000000, -0.000615,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART,  7.996926, 50.000001, 32.000000,  0.000615,  1.000000, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(圆-5)=FEAT/CIRCLE,INNER,CART,24.000000,82.712813,32.000000,0.000000,0.000000,1.000000, 10.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(圆-5), 4, CLRSRF, 20.000000, CLRSRF, 30.000000

  PTMEAS/CART, 27.897421, 79.580704, 32.000000, -0.779484,  0.626422, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 27.132109, 86.610234, 32.000000, -0.626422, -0.779484, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 20.102579, 85.844922, 32.000000,  0.779484, -0.626422,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 20.867891, 78.815392, 32.000000,  0.626422,  0.779484,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(圆-6)=FEAT/CIRCLE,INNER,CART,56.000000,82.712813,32.000000,0.000000,0.000000,1.000000, 10.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(圆-6), 4, CLRSRF, 20.000000, CLRSRF, 30.000000

  PTMEAS/CART, 56.452658, 77.733345, 32.000000, -0.090532,  0.995894, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 60.979468, 83.165471, 32.000000, -0.995894, -0.090532, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 55.547342, 87.692281, 32.000000,  0.090532, -0.995894,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 51.020532, 82.260155, 32.000000,  0.995894,  0.090532,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(圆-7)=FEAT/CIRCLE,INNER,CART,72.000000,55.000000,32.000000,0.000000,0.000000,1.000000, 10.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(圆-7), 4, CLRSRF, 20.000000, CLRSRF, 30.000000

  PTMEAS/CART, 67.000018, 54.986766, 32.000000,  0.999996,  0.002647,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 72.013234, 50.000018, 32.000000, -0.002647,  0.999996,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 76.999982, 55.013234, 32.000000, -0.999996, -0.002647, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 71.986766, 59.999982, 32.000000,  0.002647, -0.999996, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(圆-8)=FEAT/CIRCLE,INNER,CART,56.000000,27.287187,32.000000,0.000000,0.000000,1.000000, 10.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(圆-8), 4, CLRSRF, 20.000000, CLRSRF, 30.000000

  PTMEAS/CART, 56.453797, 32.266551, 32.000000, -0.090759, -0.995873, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 51.020636, 27.740984, 32.000000,  0.995873, -0.090759,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 55.546203, 22.307823, 32.000000,  0.090759,  0.995873,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 60.979364, 26.833390, 32.000000, -0.995873,  0.090759, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(圆-9)=FEAT/CIRCLE,INNER,CART,24.000000,27.287187,32.000000,0.000000,0.000000,1.000000, 10.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(圆-9), 4, CLRSRF, 20.000000, CLRSRF, 30.000000

  PTMEAS/CART, 27.901004, 30.414833, 32.000000, -0.780201, -0.625529,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 20.872354, 31.188191, 32.000000,  0.625529, -0.780201, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 20.098996, 24.159541, 32.000000,  0.780201,  0.625529, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 27.127646, 23.386183, 32.000000, -0.625529,  0.780201,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(间距面圆-1)=FEAT/CIRCLE,INNER,CART,40.000000,55.000000,33.000000,0.000000,0.000000,1.000000, 45.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(间距面圆-1), 4, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 29.679001, 35.006827, 33.000000,  0.458711,  0.888585, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   38.408627, 36.064563, 33.000000

  GOTO/CART,   45.776041, 36.896945, 33.000000

  GOTO/CART,   52.264105, 40.485353, 33.000000

  PTMEAS/CART, 59.993173, 44.679001, 33.000000, -0.888585,  0.458711, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   58.935437, 53.408627, 33.000000

  GOTO/CART,   58.103055, 60.776041, 33.000000

  GOTO/CART,   54.514647, 67.264105, 33.000000

  PTMEAS/CART, 50.320999, 74.993173, 33.000000, -0.458711, -0.888585,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   41.591373, 73.935437, 33.000000

  GOTO/CART,   34.223959, 73.103055, 33.000000

  GOTO/CART,   27.735895, 69.514647, 33.000000

  PTMEAS/CART, 20.006827, 65.320999, 33.000000,  0.888585, -0.458711,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(间距面圆-2)=FEAT/CIRCLE,INNER,CART,40.000000,55.000000,28.000000,0.000000,0.000000,1.000000, 20.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(间距面圆-2), 4, CLRSRF, 20.000000, CLRSRF, 100.000000

  PTMEAS/CART, 31.118524, 59.595582, 28.000000,  0.888148, -0.459558,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   33.521174, 55.550716, 28.000000

  GOTO/CART,   33.803595, 53.029456, 28.000000

  GOTO/CART,   35.029363, 50.808193, 28.000000

  PTMEAS/CART, 35.404418, 46.118524, 28.000000,  0.459558,  0.888148, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   39.449284, 48.521174, 28.000000

  GOTO/CART,   41.970544, 48.803595, 28.000000

  GOTO/CART,   44.191807, 50.029363, 28.000000

  PTMEAS/CART, 48.881476, 50.404418, 28.000000, -0.888148,  0.459558, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   46.478826, 54.449284, 28.000000

  GOTO/CART,   46.196405, 56.970544, 28.000000

  GOTO/CART,   44.970637, 59.191807, 28.000000

  PTMEAS/CART, 44.595582, 63.881476, 28.000000, -0.459558, -0.888148,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(间距面圆-3)=FEAT/CIRCLE,INNER,CART,40.000000,55.000000,28.000000,0.000000,0.000000,1.000000, 20.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(间距面圆-3), 4, CLRSRF, 30.000000, CLRSRF, 10.000000

  PTMEAS/CART, 44.635415, 63.860752, 28.000000, -0.463542, -0.886075,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   40.579802, 61.476288, 28.000000

  GOTO/CART,   38.057299, 61.205191, 28.000000

  GOTO/CART,   35.830554, 59.989409, 28.000000

  PTMEAS/CART, 31.139248, 59.635415, 28.000000,  0.886075, -0.463542, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   33.523712, 55.579802, 28.000000

  GOTO/CART,   33.794809, 53.057299, 28.000000

  GOTO/CART,   35.010591, 50.830554, 28.000000

  PTMEAS/CART, 35.364585, 46.139248, 28.000000,  0.463542,  0.886075, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   39.420198, 48.523712, 28.000000

  GOTO/CART,   41.942701, 48.794809, 28.000000

  GOTO/CART,   44.169446, 50.010591, 28.000000

  PTMEAS/CART, 48.860752, 50.364585, 28.000000, -0.886075,  0.463542,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

GOTO/45.860353, 51.938140, 139.493090

SNSLCT/S(L20_D3.0_A45_B180)

F(间距面圆-4)=FEAT/CIRCLE,INNER,CART,25.000000,9.322332,26.514719,-0.000000,-0.707107,0.707107, 15.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(间距面圆-4), 4, CLRSRF, 30.000000, CLRSRF, 30.000000

  PTMEAS/CART, 26.079533, 14.570408, 31.762795, -0.143938, -0.699743, -0.699743, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   24.016776, 12.065033, 29.257420

  GOTO/CART,   22.607280, 11.590199, 28.782586

  GOTO/CART,   21.562054, 10.770103, 27.962490

  PTMEAS/CART, 17.578099, 10.085677, 27.278064,  0.989587, -0.101779, -0.101779, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   21.121234,  8.627087, 25.819474

  GOTO/CART,   21.792751,  7.630423, 24.822810

  GOTO/CART,   22.952543,  6.891337, 24.083724

  PTMEAS/CART, 23.920467,  4.074255, 21.266642,  0.143938,  0.699743,  0.699743, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   25.983224,  6.579630, 23.772017

  GOTO/CART,   27.392720,  7.054464, 24.246851

  GOTO/CART,   28.437946,  7.874561, 25.066948

  PTMEAS/CART, 32.421901,  8.558986, 25.751373, -0.989587,  0.101779,  0.101779, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(间距面圆-5)=FEAT/CIRCLE,INNER,CART,50.000000,9.322332,26.514719,-0.000000,-0.707107,0.707107, 15.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(间距面圆-5), 4, CLRSRF, 30.000000, CLRSRF, 30.000000

  PTMEAS/CART, 49.797225, 14.623694, 31.816081,  0.027037, -0.706848, -0.706848, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   48.369323, 11.906170, 29.098557

  GOTO/CART,   47.095087, 11.268229, 28.460616

  GOTO/CART,   46.263098, 10.334043, 27.526430

  PTMEAS/CART, 42.502742,  9.178948, 26.371335,  0.999634,  0.019118,  0.019118, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   46.345900,  8.169269, 25.361656

  GOTO/CART,   47.248085,  7.268248, 24.460635

  GOTO/CART,   48.569224,  6.679943, 23.872330

  PTMEAS/CART, 50.202775,  4.020969, 21.213356, -0.027037,  0.706848,  0.706848, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   51.630677,  6.738493, 23.930880

  GOTO/CART,   52.904913,  7.376434, 24.568821

  GOTO/CART,   53.736902,  8.310620, 25.503007

  PTMEAS/CART, 57.497258,  9.465715, 26.658102, -0.999634, -0.019118, -0.019118, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(PLN3)=FEAT/PLANE,CART,17.500000,7.489593,27.510407,0.000000,-0.707107,0.707107

$$ Measurement points are created through nominal points

MEAS/PLANE, F(PLN3), 6, CLRSRF, 30.000000, CLRSRF, 30.000000

  GOTO/CART,   58.777231, -2.743035, 47.681329

  PTMEAS/CART, 58.777231, 12.458740, 32.479554, -0.000000, -0.707107, 0.707107, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 58.666820,  1.693157, 21.713971, -0.000000, -0.707107, 0.707107, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 36.798690,  2.745789, 22.766603, -0.000000, -0.707107, 0.707107, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 36.771486, 11.568805, 31.589619, -0.000000, -0.707107, 0.707107, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 10.194120, 12.794524, 32.815338, -0.000000, -0.707107, 0.707107, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART,  9.072616,  2.275552, 22.296366, -0.000000, -0.707107, 0.707107, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

GOTO/9.083458, -0.159986, 74.724644

GOTO/9.095560, -0.163304, 124.718567

SNSLCT/S(L20_D3.0)

F(SLT1)=FEAT/CPARLN,INNER,ROUND,CART,105.000000,10.000000,32.000000,-0.000000,0.000000,1.000000,1.000000,0.000000,0.000000, 30.240000, 10.240000

$$ Measurement points are created through nominal points

MEAS/CPARLN, F(SLT1), 12, CLRSRF, 30.000000, CLRSRF, 30.000000

  GOTO/CART,   110.000000, 11.622190, 53.497810

  PTMEAS/CART, 110.000000, 15.120000, 32.000000, -0.000000, -1.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 100.000000, 15.120000, 32.000000, -0.000000, -1.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART,  91.574051, 13.804902, 32.000000,  0.669136, -0.743140,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART,  90.078340, 11.411263, 32.000000,  0.961275, -0.275593,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART,  90.078340,  8.588737, 32.000000,  0.961275,  0.275593,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART,  91.574051,  6.195098, 32.000000,  0.669136,  0.743140,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 100.000000,  4.880000, 32.000000,  0.000000,  1.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 110.000000,  4.880000, 32.000000,  0.000000,  1.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 118.425949,  6.195098, 32.000000, -0.669136,  0.743140,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 119.921660,  8.588737, 32.000000, -0.961275,  0.275593, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 119.921660, 11.411263, 32.000000, -0.961275, -0.275593, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 118.425949, 13.804902, 32.000000, -0.669136, -0.743140,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

GOTO/116.095090, 11.201896, 81.993904

 

F(间距面圆-6)=FEAT/CIRCLE,OUTER,CART,40.000000,55.000000,27.000000,0.000000,0.000000,1.000000, 30.000000

$$ Measurement points are created through nominal points

MEAS/CIRCLE, F(间距面圆-6), 4, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 30.708480, 43.224277, 27.000000, -0.619435, -0.785048,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   35.106554, 37.677928, 27.000000

  GOTO/CART,   42.107916, 37.123851, 27.000000

  GOTO/CART,   48.788366, 39.291256, 27.000000

  PTMEAS/CART, 51.775723, 45.708480, 27.000000,  0.785048, -0.619435,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   57.322072, 50.106554, 27.000000

  GOTO/CART,   57.876149, 57.107916, 27.000000

  GOTO/CART,   55.708744, 63.788366, 27.000000

  PTMEAS/CART, 49.291520, 66.775723, 27.000000,  0.619435,  0.785048, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   44.893446, 72.322072, 27.000000

  GOTO/CART,   37.892084, 72.876149, 27.000000

  GOTO/CART,   31.211634, 70.708744, 27.000000

  PTMEAS/CART, 28.224277, 64.291520, 27.000000, -0.785048,  0.619435, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(点-6)=FEAT/POINT,CART,66.827655,85.491532,35.000000,0.000000,0.000000,1.000000

MEAS/POINT, F(点-6), 1, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 66.827655,85.491532,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

$$

$$

SNSET/APPRCH, 2.0000

SNSET/RETRCT, 2.0000

SNSET/DEPTH, 2

SNSET/SEARCH, 10.0000

SNSET/CLRSRF, 10.0000

F(间距面圆-7)=FEAT/CIRCLE,INNER,CART,40.000000,55.000000,35.000000,0.000000,-0.000000,1.000000, 45.000000

$$ Measurement points are created through nominal points

RMEAS/CIRCLE, F(间距面圆-7), 4, VECBLD, 3.000000, 3, CLRSRF, 20.000000, CLRSRF, 20.000000

$$ Senset adjustment for independent VECBLD sampling control

  SNSET/APPRCH, 10.000000

  SNSET/RETRCT, 10.000000

  PTMEAS/CART, 26.062719, 37.336416, 33.000000,  0.619435,  0.785048,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   34.698767, 36.234422, 33.000000

  GOTO/CART,   42.283575, 35.634172, 33.000000

  GOTO/CART,   49.520730, 37.982195, 33.000000

  PTMEAS/CART, 57.663584, 41.062719, 33.000000, -0.785048,  0.619435,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   58.765578, 49.698767, 33.000000

  GOTO/CART,   59.365828, 57.283575, 33.000000

  GOTO/CART,   57.017805, 64.520730, 33.000000

  PTMEAS/CART, 53.937281, 72.663584, 33.000000, -0.619435, -0.785048, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  GOTO/CART,   45.301233, 73.765578, 33.000000

  GOTO/CART,   37.716425, 74.365828, 33.000000

  GOTO/CART,   30.479270, 72.017805, 33.000000

  PTMEAS/CART, 22.336416, 68.937281, 33.000000,  0.785048, -0.619435, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

SNSET/APPRCH, 2

SNSET/RETRCT, 2

SNSET/DEPTH, 2.0000

SNSET/SEARCH, 10.0000

SNSET/CLRSRF, 10.0000

F(键槽1)=FEAT/CPARLN,INNER,ROUND,CART,105.000000,10.000000,35.000000,-0.000000,-0.000000,1.000000,1.000000,0.000000,0.000000, 30.240000, 10.240000

$$ Measurement points are created through nominal points

RMEAS/CPARLN, F(键槽1), 6, VECBLD, 3.000000, 3, CLRSRF, 20.000000, CLRSRF, 20.000000

$$ Senset adjustment for independent VECBLD sampling control

  SNSET/APPRCH, 10.000000

  SNSET/RETRCT, 10.000000

  GOTO/CART,   110.000000, 12.120000, 40.000000

  PTMEAS/CART, 110.000000, 15.120000, 33.000000,  0.000000, -1.000000, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 100.000000, 15.120000, 33.000000,  0.000000, -1.000000, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART,  89.880000, 10.000000, 33.000000,  1.000000,  0.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 100.000000,  4.880000, 33.000000, -0.000000,  1.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 110.000000,  4.880000, 33.000000, -0.000000,  1.000000,  0.000000, APPRCH, 2.000000, RETRCT, 2.000000

  PTMEAS/CART, 120.120000, 10.000000, 33.000000, -1.000000,  0.000000, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES

F(EP1)=FEAT/EDGEPT,CART,85.955774,0.000000,35.000000,-0.000000,-1.000000,0.000000,0.000000,0.000000,1.000000

RMEAS/EDGEPT, F(EP1), 1, VECBLD, 3.000000, 3, 3.300000, CLRSRF, 20.000000, CLRSRF, 20.000000

  PTMEAS/CART, 85.955774,0.000000,35.000000,-0.000000,-1.000000,0.000000, APPRCH, 2.000000, RETRCT, 2.000000

ENDMES


来源:RationalDMIS测量技术
理论控制
著作权归作者所有,欢迎分享,未经许可,不得转载
首次发布时间:2023-07-01
最近编辑:1年前
山涧果子
大专 签名征集中
获赞 203粉丝 48文章 1203课程 0
点赞
收藏
未登录
还没有评论
课程
培训
服务
行家
VIP会员 学习 福利任务 兑换礼品
下载APP
联系我们
帮助与反馈