RationalDMIS 7.1变量取值最大偏差/最小偏差（面轮廓度）

   RationalDMIS 7.1面轮廓度变量取值最大偏差/最小偏差的计算，可以用DMIS语句得到；

T(TPFS1)=TOL/PROFS,-0.0300,0.0300,DAT(A),DAT(B),DAT(C)

OUTPUT/FA(PATERN1),TA(TPFS1)

DECL/COMMON,REAL,TPFS1_MAX

TPFS1_MAX = OBTAIN/TA(TPFS1),3

DECL/COMMON,REAL,TPFS1_MIN

TPFS1_MIN = OBTAIN/TA(TPFS1),2

WRITE/DID(DEFAULTSCREEN),'最大偏差=',TPFS1_MAX

WRITE/DID(DEFAULTSCREEN),'最小偏差=',TPFS1_MIN

MIN and MAX deviation are now added. The change affects the following DMIS output 

TA(Label) = TOL/PROFS, lotol, uptol 

Lotol is now the Min deviation 

Uptol is now the Max deviation 

OBTAIN/TA(), n 

N = 2, it will return the Min Deviation   最小偏差

N = 3, it will return the Max Deviation   最大偏差

T(TPFS1)=TOL/PROFS,-0.0300,0.0300,DAT(A),DAT(B),DAT(C)

OUTPUT/FA(PATERN1),TA(TPFS1)

DECL/COMMON,REAL,TPFS1_MAX

TPFS1_MAX = OBTAIN/TA(TPFS1),3

DECL/COMMON,REAL,TPFS1_MIN

TPFS1_MIN = OBTAIN/TA(TPFS1),2

WRITE/DID(DEFAULTSCREEN),'最大偏差=',TPFS1_MAX

WRITE/DID(DEFAULTSCREEN),'最小偏差=',TPFS1_MIN