RationalDMIS 2020最大直径/最小直径输出（LP两点直径）文本+图形报告
相关文章，在仿真秀官网搜索：
RationalDMIS7.0输出最大最小直径
RationalDMIS快速输出多元素最大最小直径（半径，XYZ坐标，点轮廓度(T值））
RationalDMIS 2020 脱机编程：特征采集 2021
RationalDMIS 2020 脱机编程 2021最详细
RationalDMIS 2020 自学习编程详解
1.输出文本报告：
直径公差窗口最大/最小直径计算选项：
可以同时输出一个圆的平均、最小直径和最大直径以及最大最小LP直径。
直径公差：
公差名：长度是1-64个字符.合法字符有字母(A-Z, a-z),数字(0-9),破折线‘—’,句号‘.’,和下划线‘_’，
元素名：可以拖放的元素类型为 圆、圆柱、球
上下公差：按照图纸要求填写
ISO公差：ISO定义的标准上下公差范围，直径在3MM-50MM范围之内时可用。
实际：实际直径尺寸
偏差：直径偏差
定义公差：可以在元素公差区定义一个公差标签
接受：计算元素的直径公差，并记录到元素数据区
T(TDM1)=TOL/DIAM,0.0200,0.0500
OUTPUT/FA(Scan-1),TA(TDM1)
T(TDM4)=TOL/DIAM,0.0200,0.0500,MIN
OUTPUT/FA(Scan-1),TA(TDM4)
T(TDM5)=TOL/DIAM,0.0200,0.0500,MAX
OUTPUT/FA(Scan-1),TA(TDM5)
T(TDM7)=TOL/DIAM,0.0200,0.0500,DIAMLP
OUTPUT/FA(Scan-1),TA(TDM7)
2.输出图形报告
输出——模板输出 PDF模板：支持显示圆的最大、最小和平均直径。
附注：
圆的算法可以根据程序进行选择，有4种算法可供选择：
最小外接圆：（最小覆盖圆）将所有的测量点都包含在圆内，直径最小的那个圆。
最大内接圆：（最大空圆）所有测量点都在圆外，直径最大的那个圆。
最小区域圆：（最小半径）从这个圆的圆心出发，画两个同心圆，将所有测量点都包含在这两个同心圆内，在所有符合上面条件的同心圆中，径向距离最小的那一组。
最小二乘圆：（最小平方差）所有测量点到该圆的距离平方和最小。
（1）最小二乘方（LEAST_SQR）：
利用此方法可以最小化从数据点到圆的均乘方半径距离，是目前而言应用最通用的一种拟合方法。一般未加标注时，都默认为最小二乘，此外，当测量重点在圆心与直径时，优先选用此种方法。
（2）最小间隔（MIN_SEP）：
相比较于最小二乘法的局部误差平方和最小，最小间隔法控制的是距离最小；此外，用最小区域法评定的圆度误差一般比最小二乘法、最小外接圆法和最大内切圆法评定的圆度误差小，因此，当测量重点为圆度误差时，应优先选用最小间隔法。
（3）最大内切（MAX_INSC）：
最大内切是拟合出了一个数据范围内最大可能直径的空白圆。因此其最常用在装配孔，如在过盈配合中，当基准轴一定时，我们需要加工一个最大内切圆径超过基准轴径的孔，以确保能达到装配需求，如轴套等。
（4）最小外接（MIN_CIRCSC）
最小外接是拟合出了一个能包容测量数据直径最小的圆。与最大内切相对应，最小外接最常用在装配轴上，确保其能装入已加工好的基准孔，如某些轴类标准件、光轴、活塞销等。
DMISMN/'Created by [山涧果子] on Saturday, October 17, 2020', 4.0
UNITS/MM, ANGDEC, MMPS
WKPLAN/XYPLAN
PRCOMP/ON
TECOMP/ON
FLY/1.0000
MODE/MAN
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, 18.0000
RECALL/D(MCS)
SNSLCT/S(L30-D2_5_1_30_2)
GEOALG/BF, LSTSQR
GEOALG/ANGLB, DEFALT
GEOALG/CIRCLE, LSTSQR
GEOALG/ARC, LSTSQR
GEOALG/PLANE, LSTSQR
$$
$$
$$*/
MODE/MAN
F(PLN1)=FEAT/PLANE,CART,275.2016,144.9727,3.3391,-0.0002,-0.0001,1.0000
$$ Measurement points are created through actual points
MEAS/PLANE, F(PLN1), 3
PTMEAS/CART, 194.6380, 266.1293, 3.3409, -0.0002, -0.0001, 1.0000
PTMEAS/CART, 202.9958, 84.3931, 3.3165, -0.0002, -0.0001, 1.0000
PTMEAS/CART, 427.9709, 84.3956, 3.3601, -0.0002, -0.0001, 1.0000
ENDMES
D(CRD1) = DATSET/FA(PLN1), ZDIR
F(LN1)=FEAT/LINE,BND,CART,468.1440,114.4398,-0.5649,467.6449,216.5937,-0.5851,1.0000,0.0049,0.0000
$$ Measurement points are created through actual points
MEAS/LINE, F(LN1), 2
PTMEAS/CART, 468.1440, 114.4398, -0.5649, 1.0000, 0.0049, 0.0000
PTMEAS/CART, 467.6449, 216.5937, -0.5851, 1.0000, 0.0049, 0.0000
ENDMES
D(CRD2) = ROTATE/ZAXIS, FA(LN1), XDIR
F(PT1)=FEAT/POINT,CART,75.5904,-445.8533,-3.5798,-1.0000,-0.0000,0.0000
MEAS/POINT, F(PT1), 1
PTMEAS/CART, 75.5904,-445.8533,-3.5798,-1.0000,-0.0000,0.0000
ENDMES
D(CRD3) = TRANS/XORIG, FA(PT1), YORIG, FA(LN1), ZORIG, FA(PLN1)
$$ Set.CAD2PCS.CADM_1
MODE/PROG,MAN
$$ MACRO: EASI_CLEARPLN_GOTO
$$ FUNCTION: CLEARANCE SURFACE IMPLEMENTATION
$$ Move machine CLEAR SURFACE DIST above the current clear surface
$$ plane and then move machine parallel to the clear surface plane
$$ ALL Macro parameters are in PCS and Current UNITS
$$ Last update: 3-1-04 Add mode checking. only works in PROG MODE
$$ Last update: 8-24-04 Clear position is based on the surface of
$$
$$ This sample DMIS Macro is provided by External-Array Software, Inc.
$$ It should be modified for your own use. There is no guarantee for
$$ the quality of this Macro. November, 2003
M(EASI_CLEARPLN_GOTO) = MACRO/ISNOM, TARX, TARY, TARZ
DECL/LOCAL, REAL, CCX, CCY, CCZ, CCI, CCJ, CCK
DECL/LOCAL, REAL, CURX, CURY, CURZ, TD, CLRDIST, SDIAM
DECL/LOCAL, CHAR, 255, CLRLABEL, FLABEL, MMODE, SNAME
MMODE = VALUE/MODE
CLRLABEL = VALUE/SNSET, CLRSRF
IF/ ( (LEN(CLRLABEL) .GT. 0) .AND. (MMODE .EQ. 'PROG,MAN') )
CLRDIST = VALUE/SNSET, CLRSRF, DIST
FLABEL = ASSIGN/'FA'
IF/ ISNOM .EQ. 0
FLABEL = ASSIGN/'F'
ENDIF
CCX = OBTAIN/FLABEL(@CLRLABEL), 3
CCY = OBTAIN/FLABEL(@CLRLABEL), 4
CCZ = OBTAIN/FLABEL(@CLRLABEL), 5
CCI = OBTAIN/FLABEL(@CLRLABEL), 6
CCJ = OBTAIN/FLABEL(@CLRLABEL), 7
CCK = OBTAIN/FLABEL(@CLRLABEL), 8
SNAME = VALUE/SNSLCT
SDIAM = OBTAIN/SS(SNAME), 8
CCX = ASSIGN/CCX + CCI * SDIAM/2
CCY = ASSIGN/CCY + CCJ * SDIAM/2
CCZ = ASSIGN/CCZ + CCK * SDIAM/2
CURX = VALUE/GOTOM, XAXIS
CURY = VALUE/GOTOM, YAXIS
CURZ = VALUE/GOTOM, ZAXIS
TD = ASSIGN/(CURX - CCX) * CCI + (CURY - CCY) * CCJ + (CURZ - CCZ) * CCK
IF/ TD .LT. CLRDIST
TD = ASSIGN/(CLRDIST - TD)
GOTO/CURX+CCI*TD, CURY+CCJ*TD, CURZ+CCK*TD
ENDIF
TD = ASSIGN/(TARX - CCX) * CCI + (TARY - CCY) * CCJ + (TARZ - CCZ) * CCK
IF/ TD .LT. CLRDIST
TD = ASSIGN/(CLRDIST - TD)
GOTO/TARX+CCI*TD, TARY+CCJ*TD, TARZ+CCK*TD
ENDIF
ENDIF
ENDMAC
SNSET/APPRCH, 2
SNSET/RETRCT, 2
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, FA(PLN1), 20
F(PLN2)=FEAT/PLANE,CART,93.6492,149.6858,0,0.0000,-0.0000,1.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 37.3942, 21.1400, 20.9991
MEAS/PLANE, F(PLN2), 10
GOTO/CART, 37.3942, 21.1400, 20.9991
PTMEAS/CART, 37.3942, 21.1400, -0.0000, 0.0000, 0.0000, 1.0000
PTMEAS/CART, 111.9969, 34.8850, -0.0000, 0.0000, 0.0000, 1.0000
PTMEAS/CART, 219.9704, 41.4180, 0.0000, 0.0000, 0.0000, 1.0000
PTMEAS/CART, 120.5141, 106.1680, -0.0000, 0.0000, 0.0000, 1.0000
PTMEAS/CART, 12.2102, 123.2553, -0.0000, 0.0000, 0.0000, 1.0000
PTMEAS/CART, 12.8966, 189.2465, -0.0000, 0.0000, 0.0000, 1.0000
PTMEAS/CART, 106.1417, 196.7029, 0.0000, 0.0000, 0.0000, 1.0000
PTMEAS/CART, 12.0440, 263.7333, -0.0000, 0.0000, 0.0000, 1.0000
PTMEAS/CART, 102.1316, 262.1699, 0.0000, 0.0000, 0.0000, 1.0000
PTMEAS/CART, 201.1428, 258.1070, -0.0000, 0.0000, 0.0000, 1.0000
ENDMES
D(CRD4) = DATSET/FA(PLN2), ZDIR
F(LN2)=FEAT/LINE,BND,CART,22.4422,0.0000,-6,148.7262,0.0000,-6,-0.0000,-1.0000,-0.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 201.1460, 258.1098, 20.9993
MEAS/LINE, F(LN2), 4
GOTO/CART, 201.1460, 258.1098, 20.9993
GOTO/CART, 22.4365, -2.9977, 21.0012
PTMEAS/CART, 22.4388, -0.0000, -6.0000, -0.0000, -1.0000, 0.0000
PTMEAS/CART, 44.1887, -0.0000, -6.0000, -0.0000, -1.0000, 0.0000
PTMEAS/CART, 76.5099, -0.0000, -6.0000, -0.0000, -1.0000, 0.0000
PTMEAS/CART, 148.7214, 0.0000, -6.0000, -0.0000, -1.0000, 0.0000
ENDMES
F(LN3)=FEAT/LINE,BND,CART,-0.0000,20.1426,-6,0.0000,264.9076,-6.0000,-1.0000,0.0000,0.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 148.7243, -2.9934, 21.0122
MEAS/LINE, F(LN3), 6
GOTO/CART, 148.7243, -2.9934, 21.0122
GOTO/CART, -3.0009, 20.1438, 20.9974
PTMEAS/CART, 0.0007, 20.1419, -6.0000, -1.0000, -0.0000, -0.0000
PTMEAS/CART, 0.0005, 51.7475, -6.0000, -1.0000, -0.0000, -0.0000
PTMEAS/CART, 0.0005, 92.2775, -6.0000, -1.0000, -0.0000, -0.0000
PTMEAS/CART, 0.0006, 133.1857, -6.0000, -1.0000, -0.0000, -0.0000
PTMEAS/CART, 0.0004, 202.6817, -6.0000, -1.0000, -0.0000, -0.0000
PTMEAS/CART, 0.0005, 264.9077, -6.0000, -1.0000, -0.0000, -0.0000
ENDMES
F(PT_INTER1)=FEAT/POINT,CART,-0.0000,0.0000,-6.0000,-0.0000,-0.0000,1.0000
CONST/POINT,F(PT_INTER1),INTOF,FA(LN2),FA(LN3)
D(CRD5) = ROTATE/ZAXIS, FA(LN2), XDIR
D(CRD6) = TRANS/XORIG, FA(PT_INTER1), YORIG, FA(PT_INTER1), ZORIG, FA(PLN2)
F(PLN2)=FEAT/PLANE,CART,93.6492,149.6858,0.0000,0.0000,0.0000,1.0000
F(LN2)=FEAT/LINE,BND,CART,22.4422,-0.0000,-6.0000,148.7262,-0.0000,-6.0000,-0.0000,-1.0000,0.0000
F(LN3)=FEAT/LINE,BND,CART,0.0000,20.1426,-6.0000,0.0000,264.9076,-6.0000,-1.0000,-0.0000,-0.0000
$$ Set.CAD2PCS.CADM_1
MODE/PROG,MAN
SNSET/APPRCH, 2
SNSET/RETRCT, 2
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, FA(PLN2), 20
F(Scan-1)=FEAT/CIRCLE,INNER,CART,57.1500,81.2800,-4.0000,0.0000,0.0000,1.0000, 50.8000
SCNSET/DRAG, ANGLE, 0.5000
P(SCAN-1) = PATH/ARC,CART, 57.1500, 81.2800, -4.0000, 0.0000, 0.0000, 1.0000, 25.4000, 0.0000, 360.0000, -0.3112, 0.9503, 0.0000
MEAS/CIRCLE, F(Scan-1), 3
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 49.2445, 105.4184, -4.0000
GOTO/CART, 50.1780, 102.5683, -4.0000
PAMEAS/P(Scan-1), 0.3112, -0.9503, 0.0000
GOTO/CART, 50.1780, 102.5683, -4.0000
ENDMES
F(Scan-2)=FEAT/CIRCLE,INNER,CART,57.1500,81.2800,-4.0000,0.0000,0.0000,1.0000, 50.8000
$$ Path label = CSP_SCAN-2
P(CSP_SCAN-2) = PATH/CURVE, $
PTDATA, 82.5500, 81.2800, -4.0000, -1.0000, 0.0000, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 82.3502, 78.1004, -4.0000, -0.9921, 0.1252, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 81.7539, 74.9708, -4.0000, -0.9687, 0.2484, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 80.7706, 71.9404, -4.0000, -0.9299, 0.3677, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 79.4156, 69.0570, -4.0000, -0.8766, 0.4812, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 77.7104, 66.3659, -4.0000, -0.8095, 0.5872, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 75.6816, 63.9094, -4.0000, -0.7296, 0.6839, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 73.3614, 61.7262, -4.0000, -0.6382, 0.7698, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 70.7861, 59.8506, -4.0000, -0.5369, 0.8437, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 67.9962, 58.3122, -4.0000, -0.4270, 0.9042, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 65.0357, 57.1351, -4.0000, -0.3105, 0.9506, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 61.9512, 56.3379, -4.0000, -0.1890, 0.9820, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 58.7911, 55.9331, -4.0000, -0.0646, 0.9979, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 55.6052, 55.9270, -4.0000, 0.0608, 0.9981, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 52.4436, 56.3198, -4.0000, 0.1853, 0.9827, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 49.3560, 57.1053, -4.0000, 0.3068, 0.9518, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 46.3911, 58.2712, -4.0000, 0.4236, 0.9059, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 43.5954, 59.7990, -4.0000, 0.5336, 0.8457, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 41.0130, 61.6648, -4.0000, 0.6353, 0.7723, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 38.6845, 63.8391, -4.0000, 0.7270, 0.6866, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 36.6464, 66.2879, -4.0000, 0.8072, 0.5902, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 34.9310, 68.9725, -4.0000, 0.8748, 0.4845, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 33.5651, 71.8507, -4.0000, 0.9285, 0.3712, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 32.5702, 74.8773, -4.0000, 0.9677, 0.2521, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 31.9621, 78.0047, -4.0000, 0.9917, 0.1290, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 31.7502, 81.1835, -4.0000, 1.0000, 0.0038, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 31.9379, 84.3639, -4.0000, 0.9926, -0.1214, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 32.5223, 87.4957, -4.0000, 0.9696, -0.2447, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 33.4941, 90.5298, -4.0000, 0.9313, -0.3642, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 34.8381, 93.4183, -4.0000, 0.8784, -0.4779, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 36.5331, 96.1159, -4.0000, 0.8117, -0.5841, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 38.5525, 98.5801, -4.0000, 0.7322, -0.6811, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 40.8645, 100.7721, -4.0000, 0.6412, -0.7674, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 43.4326, 102.6574, -4.0000, 0.5401, -0.8416, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 46.2166, 104.2064, -4.0000, 0.4304, -0.9026, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 49.1726, 105.3948, -4.0000, 0.3141, -0.9494, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 52.2541, 106.2037, -4.0000, 0.1928, -0.9812, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 55.4126, 106.6205, -4.0000, 0.0684, -0.9977, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 58.5985, 106.6387, -4.0000, -0.0570, -0.9984, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 61.7615, 106.2579, -4.0000, -0.1816, -0.9834, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 64.8521, 105.4841, -4.0000, -0.3032, -0.9529, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 67.8214, 104.3295, -4.0000, -0.4201, -0.9075, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 70.6229, 102.8123, -4.0000, -0.5304, -0.8477, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 73.2124, 100.9564, -4.0000, -0.6324, -0.7747, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 75.5491, 98.7909, -4.0000, -0.7244, -0.6894, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 77.5965, 96.3499, -4.0000, -0.8050, -0.5933, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 79.3221, 93.6718, -4.0000, -0.8729, -0.4879, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 80.6989, 90.7988, -4.0000, -0.9271, -0.3748, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 81.7053, 87.7760, -4.0000, -0.9667, -0.2557, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 82.3253, 84.6510, -4.0000, -0.9912, -0.1327, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 82.5493, 81.4730, -4.0000, -1.0000, -0.0076, -0.0000, HEADCS, 0.0000, 0.0000, $
PTDATA, 82.5500, 81.2800, -4.0000, -1.0000, 0.0000, -0.0000, HEADCS, 0.0000, 0.0000
SCNSET/DRAG, DIST, 0.5000
MEAS/CIRCLE, F(Scan-2), 52
GOTO/CART, 79.5509, 81.2800, -4.0000
PAMEAS/P(CSP_Scan-2)
GOTO/CART, 79.5509, 81.2800, -4.0000
ENDMES
