RationalDMIS间距面功能全面超越PCDMIS
提示：Mode/Pro,Man模式下应用间距面。
注意：
（1）DMIS中安全平面（间距面）只在"AUTO"模式下起作用。需要在“程序设置”--勾选“MODE/PROG，MAN下应用间距面”，这项兼容性改变使得“安全平面”，在PROG模式下也可以起作用。
（2）测量操作区，测量设置窗口“清除平面设置”可以设置自动测量元素测量前后的安全位置（PC-DMIS“两者”，“前”，“后”）。
Mode/Pro，Man模式下应用间距面：勾选后在程序模式下会自动调用间距面，间距面的位置根据理论位置来计算；
Crete PTMEAS with Apprch/Retrct：设置为是，记录的DMIS程序中PTMEAS语句中会有接近回退参数；Creat MEAS with Clear Surface setting：设置为是，记录的DMIS程序中MEAS语句中会有安全平面设置参数；
PC DMIS 和RationalDMIS间距面功能对比在文章下方：
清除平面设置解读：
用来设置测量前和测量后使用不同的安全平面来抬高；
有3个设置选项：无、关闭、间距面，窗口内可以拖放平面：
控制如下功能：
A、 MEAS语句的清除平面设置
MEAS/POINT, F(PT13), 1, CLRSRF, F(PLN2), 2.00, CLRSRF, F(PLN2), 20.00
B、从Cad上选取并测量调用此设置；
C、从元素数据区自动测量调用此设置；
D、RMEAS/VECBLD支持‘创建MEAS时增加清除平面设置’设置；
例如点: RMEAS/POINT, F(PT1), 1, VECBLD, 4.000, 3, CLRSRF, 15.0, CLRSRF, 26.0
DMISMN/'Created by [深圳力合精密装备科技有限公司-090118] on 星期三, 七月 18, 2018', 4.0
UNITS/MM, ANGDEC, MMPS
WKPLAN/XYPLAN
PRCOMP/ON
TECOMP/ON
FLY/1.000000
MODE/PROG, MAN
SNSET/APPRCH, 2.000000
SNSET/RETRCT, 2.000000
SNSET/DEPTH, 0.000000
SNSET/SEARCH, 10.000000
SNSET/CLRSRF, 10.000000
RECALL/D(MCS)
SNSLCT/S(ROOTSN1)
GEOALG/BF, LSTSQR
GEOALG/ANGLB, DEFALT
GEOALG/CIRCLE, LSTSQR
GEOALG/ARC, LSTSQR
GEOALG/PLANE, LSTSQR
$$
$$
MODE/PROG,MAN
F(PT1)=FEAT/POINT,CART,9.292552,80.861908,35.000000,0.000000,0.000000,1.000000
MEAS/POINT, F(PT1), 1, CLRSRF, 20.000000, CLRSRF, 20.000000
PTMEAS/CART, 9.292552,80.861908,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000
ENDMES
F(PT2)=FEAT/POINT,CART,8.651951,28.114450,35.000000,0.000000,0.000000,1.000000
MEAS/POINT, F(PT2), 1, CLRSRF, 20.000000, CLRSRF, 20.000000
PTMEAS/CART, 8.651951,28.114450,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000
ENDMES
F(PT3)=FEAT/POINT,CART,70.848228,23.717142,35.000000,0.000000,0.000000,1.000000
MEAS/POINT, F(PT3), 1, CLRSRF, 20.000000, CLRSRF, 10.000000
PTMEAS/CART, 70.848228,23.717142,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000
ENDMES
F(PT4)=FEAT/POINT,CART,85.526016,56.336372,35.000000,0.000000,0.000000,1.000000
MEAS/POINT, F(PT4), 1, CLRSRF, 10.000000, CLRSRF, 20.000000
PTMEAS/CART, 85.526016,56.336372,35.000000,0.000000,0.000000,1.000000, APPRCH, 2.000000, RETRCT, 2.000000
ENDMES
F(CIR1)=FEAT/CIRCLE,INNER,CART,40.000000,55.000000,32.000000,0.000000,0.000000,1.000000, 45.000000
$$ Measurement points are created through nominal points
MEAS/CIRCLE, F(CIR1), 4, CLRSRF, 15.000000, CLRSRF, 30.000000
GOTO/CART, 40.000000, 74.500000, 43.000000
GOTO/CART, 59.500000, 55.000000, 43.000000
GOTO/CART, 59.500000, 55.000000, 42.000000
PTMEAS/CART, 62.500000, 55.000000, 32.000000, -1.000000, 0.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000
GOTO/CART, 58.015651, 47.537673, 32.000000
GOTO/CART, 53.788582, 41.211418, 32.000000
GOTO/CART, 47.462327, 36.984349, 32.000000
PTMEAS/CART, 40.000000, 32.500000, 32.000000, 0.000000, 1.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000
GOTO/CART, 32.537673, 36.984349, 32.000000
GOTO/CART, 26.211418, 41.211418, 32.000000
GOTO/CART, 21.984349, 47.537673, 32.000000
PTMEAS/CART, 17.500000, 55.000000, 32.000000, 1.000000, 0.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000
GOTO/CART, 21.984349, 62.462327, 32.000000
GOTO/CART, 26.211418, 68.788582, 32.000000
GOTO/CART, 32.537673, 73.015651, 32.000000
PTMEAS/CART, 40.000000, 77.500000, 32.000000, 0.000000, -1.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000
GOTO/CART, 40.000000, 74.500000, 42.000000
ENDMES
F(CIR2)=FEAT/CIRCLE,INNER,CART,56.000000,27.287187,32.000000,-0.000000,-0.000000,1.000000, 10.000000
$$ Measurement points are created through nominal points
MEAS/CIRCLE, F(CIR2), 4, CLRSRF, 10.000000, CLRSRF, 40.000000
GOTO/CART, 56.000000, 29.287187, 43.000000
GOTO/CART, 58.000000, 27.287187, 43.000000
GOTO/CART, 58.000000, 27.287187, 42.000000
PTMEAS/CART, 61.000000, 27.287187, 32.000000, -1.000000, -0.000000, -0.000000, APPRCH, 2.000000, RETRCT, 2.000000
PTMEAS/CART, 56.000000, 22.287187, 32.000000, 0.000000, 1.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000
PTMEAS/CART, 51.000000, 27.287187, 32.000000, 1.000000, 0.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000
PTMEAS/CART, 56.000000, 32.287187, 32.000000, 0.000000, -1.000000, 0.000000, APPRCH, 2.000000, RETRCT, 2.000000
GOTO/CART, 56.000000, 29.287187, 42.000000
ENDMES
PC-DMIS间距面功能三种如下：
RationalDMIS间距面功能四种，对PC DMIS间距面功能全覆盖:
