$$******************************************************************** $$ Visual DMIS $$******************************************************************** DMISMN/'Visual DMIS build program',05.2 UNITS/MM,ANGRAD WKPLAN/XYPLAN MODE/AUTO,PROG,MAN FLY/ON PRCOMP/ON TECOMP/ON SNSET/SEARCH,10 SNSET/RETRCT,2 SNSET/APPRCH,2 SNSET/DEPTH,0 SNSET/DEPTH,0 RECALL/D(A1) SNSLCT/SA(L20-2.1.20.2.A0.0-B0.0) $$******************************************************************** $$ CALL/EXTERN,DME,'COORDTYPE','CART' DID(DEFAULTREPORT)=DEVICE/STOR,'C:\Users\简洪伟\Documents\Administrator\' $ 'VismsTmp.rptx' OPEN/DID(DEFAULTREPORT),FDATA,V(FORMAT2),OUTPUT,OVERWR PN(PID)=PARTID/stringPartID OP(OPID)=OPERID/stringOperID R(REPORTHEAD)=REPORT/DATE,TIME,PN(PID),OP(OPID) OUTPUT/R(REPORTHEAD) $$ $$******************************************************************** MODE/MAN F(平面1)=FEAT/PLANE,CART,32.0594,37.3321,0,0,0,1 MEAS/PLANE,F(平面1),4 ENDMES F(直线1)=FEAT/LINE,BND,CART,5.381,0,-4.1825,$ 59.9912,0,-4.1825,0,-1,0 MEAS/LINE,F(直线1),2,FA(平面1) ENDMES F(直线2)=FEAT/LINE,BND,CART,0,4.6793,-3.7103,$ 0,58.5485,-3.7103,-1,0,0 MEAS/LINE,F(直线2),2,FA(平面1) ENDMES F(点1)=FEAT/POINT,CART,0,0,-3.9464,0,0,1 CONST/POINT,F(点1),INTOF,FA(直线1),FA(直线2) DATDEF/FA(平面1),DAT(A)DATDEF/FA(直线1),DAT(B)DATDEF/FA(点1),DAT(C) D(A2)=DATSET/DAT(A),ZDIR,ZORIG,DAT(B),XDIR,DAT(C),XORIG,YORIG F(平面1)=FEAT/PLANE,CART,32.0594,37.3321,0,0,0,1 F(直线1)=FEAT/LINE,BND,CART,5.381,0,-4.1825,$ 59.9912,0,-4.1825,0,-1,0 F(直线2)=FEAT/LINE,BND,CART,0,4.6793,-3.7103,$ 0,58.5485,-3.7103,-1,0,0 F(点1)=FEAT/POINT,CART,0,0,-3.9464,0,0,1 EQUATE/DA(MCS),DA(A2) 来源：山涧果子
