要点：在A孔，B孔的中点设定原点RationalDMIS7.1坐标系 （汇总）1.测量平面，A孔，B孔。2.最佳拟合直线 A孔，B孔构造最佳拟合直线 3.构造中分点作为XY原点4.3-2-1法构建零件坐标系找正：平面（PLN1） Z+旋转：直线（LN_BF1） X+平移（原点）： (X):点PT_MID1 (Y):点PT_MID1 (Z):PLN1$$/* HeaderDMISMN/'Created by [爱科腾瑞科技(北京)有限公司-091520-DEMO] on Friday, April 03, 2020', 4.0UNITS/MM, ANGDEC, MMPSWKPLAN/XYPLANPRCOMP/ONTECOMP/ONFLY/1.0000MODE/MANSNSET/APPRCH, 2.0000SNSET/RETRCT, 2.0000SNSET/DEPTH, 0.0000SNSET/SEARCH, 10.0000SNSET/CLRSRF, 20.0000RECALL/D(MCS)SNSLCT/S(L20-D2.0)GEOALG/BF, LSTSQRGEOALG/ANGLB, DEFALTGEOALG/CIRCLE, MAXINSGEOALG/ARC, LSTSQRGEOALG/PLANE, LSTSQR$$$$$$*/MODE/MANF(PLN1)=FEAT/PLANE,CART,-0.2338,6.2206,0.0000,-0.0000,0.0000,1.0000$$ Measurement points are created through actual pointsMEAS/PLANE, F(PLN1), 4 PTMEAS/CART, -48.9087, 33.1050, -0.0000, -0.0000, 0.0000, 1.0000 PTMEAS/CART, -50.9854, -17.9224, -0.0000, -0.0000, 0.0000, 1.0000 PTMEAS/CART, 49.4508, -16.8336, -0.0000, -0.0000, 0.0000, 1.0000 PTMEAS/CART, 49.5082, 26.5335, -0.0000, -0.0000, 0.0000, 1.0000ENDMESF(CIR1)=FEAT/CIRCLE,INNER,CART,-35.0000,0.0000,-5.0212,0.0000,0.0000,1.0000, 20.0000$$ Measurement points are created through actual pointsMEAS/CIRCLE, F(CIR1), 4 PTMEAS/CART, -38.0943, 9.5092, -5.0212, 0.3094, -0.9509, -0.0000 PTMEAS/CART, -25.3096, 2.4691, -5.0212, -0.9690, -0.2469, -0.0000 PTMEAS/CART, -34.7662, -9.9973, -5.0212, -0.0234, 0.9997, -0.0000 PTMEAS/CART, -44.9999, 0.0544, -5.0212, 1.0000, -0.0054, -0.0000ENDMESF(CIR2)=FEAT/CIRCLE,INNER,CART,35.0000,0.0000,-4.5379,0.0000,0.0000,1.0000, 20.0000$$ Measurement points are created through actual pointsMEAS/CIRCLE, F(CIR2), 4 PTMEAS/CART, 34.2871, 9.9746, -4.5379, 0.0713, -0.9975, -0.0000 PTMEAS/CART, 44.8815, 1.5350, -4.5379, -0.9881, -0.1535, -0.0000 PTMEAS/CART, 34.9592, -9.9999, -4.5379, 0.0041, 1.0000, -0.0000 PTMEAS/CART, 25.7356, -3.7644, -4.5379, 0.9264, 0.3764, -0.0000ENDMES$$ CREATED BY : External-Array Software, Inc$$ DATE : Jan 19, 2009$$ DISLAIMER: $$ This Macro has been tested internally but not been tested with$$ other DMIS compatible software. This Macro is provided as sample$$ and can be modifed for your own use. External-Array doesn't not $$ guarantee the quality of this Macro.$$ FUNCION: Create a nominal line using two actual features$$ DI, DJ, DK are the normal vector of the plane that the line lies onM(EASI_2PT_TO_LINE) = Macro/'FEAT1', 'FEAT2', 'FEATLINE', DI, DJ, DK DECL/LOCAL,DOUBLE,DVALUE[6] DECL/LOCAL,INTGR, INDEX1, INDEX2 CALL/M(EASI_GETX_INDEX), FEAT1, INDEX1 CALL/M(EASI_GETX_INDEX), FEAT2, INDEX2 DVALUE[1] = OBTAIN/FA(@FEAT1),INDEX1 DVALUE[2] = OBTAIN/FA(@FEAT1),INDEX1+1 DVALUE[3] = OBTAIN/FA(@FEAT1),INDEX1+2 DVALUE[4] = OBTAIN/FA(@FEAT2),INDEX2 DVALUE[5] = OBTAIN/FA(@FEAT2),INDEX2+1 DVALUE[6] = OBTAIN/FA(@FEAT2),INDEX2+2 F(@FEATLINE) = FEAT/LINE,BND,CART,DVALUE[1],DVALUE[2],DVALUE[3],$ DVALUE[4],DVALUE[5],DVALUE[6],$ DI, DJ, DKENDMACCALL/M(EASI_2PT_TO_LINE),(CIR1),(CIR2),(LN_BF1), 0.0000, 0.0000, 1.0000CONST/LINE,F(LN_BF1),BF,FA(CIR1),FA(CIR2)F(PT_MID1)=FEAT/POINT,CART,0.0000,0.0000,-4.7796,0.0000,0.0000,1.0000CONST/POINT, F(PT_MID1), MIDPT, FA(CIR1), FA(CIR2), PTPTD(CRD1) = DATSET/FA(PLN1), ZDIR, ZORIG, FA(LN_BF1), XDIR, FA(PT_MID1), XORIGD(CRD1) = TRANS/ZORIG, -0, YORIG, FA(PT_MID1), XORIG, -0来源：山涧果子
