首页/文章/ 详情

【新文速递】2024年4月22日固体力学SCI期刊最新文章

1天前浏览8

 

今日更新:International Journal of Solids and Structures 1 篇,Mechanics of Materials 1 篇,Thin-Walled Structures 3 篇

International Journal of Solids and Structures

A flexible, reusable and adjustable high-performance energy absorption system inspired by interlocking suture structures

Jiaxuan Li, Chao Sui, Yuna Sang, Yichen Zhou, Zifu Zang, Yushun Zhao, Xiaodong He, Chao Wang

doi:10.1016/j.ijsolstr.2024.112839

一种灵活、可重复使用和可调节的高性能能量吸收系统,灵感来自于联锁缝合结构

Energy absorption systems play a very important role in impact protection under complex load conditions. However, traditional protective structures cannot adjust the mechanical properties on demand to accommodate variable load characteristics once manufactured. Therefore, inspired by the superior compression resistance of the diabolical ironclad beetle, a modular energy absorption system is proposed by combining the efficient mechanical properties of thin-walled tubes and the robust connectivity of interlocking suture structures, which can be easily assembled from only bio-inspired tubes without external constraints. FEM simulations were performed to systematically investigate the static and dynamic mechanical properties of the proposed system, and its crushing performance was demonstrated experimentally. Additionally, the influence of geometric parameters on the mechanical properties of the system has been investigated, and the insensitivity of secondary geometrical parameters and assembly defects has been verified, which shows that the system has a certain safety margin to avoid catastrophic accidents caused by fabrication defects. Moreover, the system exhibits excellent reusability under multi-impact load environments and its energy absorption capacity does not degrade after the primary impact. Furthermore, the system exhibits good designability thanks to the discrete modular structures, its mechanical properties can be tuned by stiffness design without affecting the energy absorption capacity, and its specific energy absorption can be effectively improved by lightweight design. This study provides a novel design strategy for the protection system applied used in multiple complex environments.

能量吸收系统在复杂载荷条件下的冲击防护中起着非常重要的作用。然而,传统的保护结构一旦制造出来,就不能根据需要调整机械性能以适应可变的载荷特性。因此,受恶魔般的铁甲甲虫优越的抗压缩性能的启发,我们提出了一种模块化的能量吸收系统,结合了薄壁管的高效机械性能和互锁缝合结构的坚固连接,可以很容易地由仿生管组装而不受外部约束。通过有限元模拟系统地研究了该系统的静态和动态力学性能,并对其破碎性能进行了实验验证。此外,还研究了几何参数对系统力学性能的影响,验证了二次几何参数和装配缺陷的不敏感性,表明该系统具有一定的安全裕度,可以避免制造缺陷引起的灾难性事故。在多次冲击载荷环境下,系统具有良好的可重复使用性,在一次冲击后,系统的能量吸收能力不会下降。该系统采用离散模块化结构,具有良好的可设计性,通过刚度设计可以在不影响吸能能力的情况下调整其力学性能,通过轻量化设计可以有效提高其比能吸收。该研究为应用于多种复杂环境的保护系统提供了一种新的设计策略。


Mechanics of Materials

On the development of a constitutive model for steel subjected to fire

Gustavo Provençano Vilardo, Theodoro Antoun Netto

doi:10.1016/j.mechmat.2024.105012

火灾作用下钢的本构模型的建立

The behavior of steel under thermal and mechanical loading including high transient temperatures and strain rates (e.g., fire, creep or explosion) is extremely complex. To study this behavior, we propose a constitutive model accordance with the laws of thermodynamic, the principle of virtual power and experimental results. The thermodynamic framework considers the Clausius-Duhem inequality and maximum dissipation rate principle, as well as the theory of finite deformations, linear isotropic viscoelasticity, nonlinear isotropic and kinematic hardening, local and non-local viscoplasticity, local and non-local anisotropic viscodamage and parameters associated to material behavior dependent on loadings. The components of the thermodynamic conjugate forces are defined from the Helmholtz free energy function and the rate of energy dissipation, which are postulated considering the creep phenomenon, thermal-mechanical transient phenomenon, cyclic phenomenon and plastic wave propagation phenomenon. The balance of microforces is defined based on the principle of virtual power. A novel rule of non-associated thermo-viscoplastic flow of the Perzyna type and a novel rate dependent local and non-local damage evolution law are introduced from constitutive model. The verification of the model was carried out in two benchmark studies composed of fire tests. The predictions of the model have shown in according with the results of the experiments. A sensitivity study was also performed with a view to analysis the influence of the parameters in achieved results. From this study a simplified constitutive model is presented. Benchmark studies composed of explosion tests are part of future work.

钢在热载荷和机械载荷下的性能,包括高瞬态温度和应变率(例如,火灾、蠕变或爆炸)是极其复杂的。为了研究这种行为,我们根据热力学定律、虚功率原理和实验结果提出了一个本构模型。热力学框架考虑了Clausius-Duhem不等式和最大耗散率原理,以及有限变形理论,线性各向同性粘弹性,非线性各向同性和运动硬化,局部和非局部粘塑性,局部和非局部各向异性粘损伤以及与材料行为相关的参数依赖于载荷。考虑蠕变现象、热-力瞬变现象、循环现象和塑性波传播现象,从亥姆霍兹自由能函数和能量耗散率定义了热力学共轭力的分量。基于虚功率原理定义了微力平衡。从本构模型出发,提出了一种新的Perzyna型非关联热粘塑性流动规律和一种新的速率相关的局部和非局部损伤演化规律。模型的验证是在两个由火试验组成的基准研究中进行的。该模型的预测结果与实验结果相吻合。还进行了敏感性研究,以分析参数对所取得结果的影响。在此基础上提出了一种简化的本构模型。由爆炸试验组成的基准研究是未来工作的一部分。


Thin-Walled Structures

Utilizing Optimal Physics-Informed Neural Networks for Dynamical Analysis of Nanocomposite One-Variable Edge Plates

Nguyen Cong Tan, Nguyen Manh Dzung, Nguyen Duc Tien, Nguyen Hoang Ha, Nguyen Thanh Dong, Dinh Gia Ninh

doi:10.1016/j.tws.2024.111928

利用最优物理信息神经网络进行纳米复合材料单变量边板的动力学分析

This study presents an innovative Physics-Informed Neural Network (PINN) approach designed to predict the dynamic responses of the One-Variable Edge Plate (OVEP), a unique plate structure characterized by an edge defined by arbitrary mathematical functions. The OVEP is constructed from a nanocomposite material reinforced with graphene nanoplatelets. Utilizing an optimized PINN pipeline, this research successfully predicts the vibration characteristics of the OVEP, encompassing linear, nonlinear vibrations, and beating phenomena. The study also demonstrates that the optimal PINN outperforms conventional neural network in terms of stability, accuracy (achieving above 99% accuracy), and efficiency in predicting long-duration vibrations. Additionally, the computational time required for generating testing results is notably diminished compared to traditional partial differential equation (PDE) solvers (reduced by about 3 to 12 times). To demonstrate model robustness, synthetic noise is intentionally introduced into the training data. The results not only enhance our understanding of the complex dynamics of the OVEP but also highlight the effectiveness of the proposed PINN framework in capturing and forecasting the dynamic behaviors of advanced plate structures. This research presents a promising potential for addressing dynamic problems in the fields of aerospace, civil, and mechanical engineering.

本研究提出了一种创新的物理信息神经网络(PINN)方法,旨在预测单变量边缘板(OVEP)的动态响应,OVEP是一种独特的板结构,其特征是由任意数学函数定义的边缘。OVEP由石墨烯纳米片增强的纳米复合材料构成。利用优化的PINN管道,本研究成功地预测了OVEP的振动特性,包括线性、非线性振动和跳动现象。该研究还表明,最优的PINN在稳定性、精度(达到99%以上的精度)和预测长时间振动的效率方面优于传统神经网络。此外,与传统的偏微分方程(PDE)求解器相比,生成测试结果所需的计算时间显著减少(减少约3到12倍)。为了证明模型的鲁棒性,在训练数据中有意地引入了合成噪声。结果不仅增强了我们对OVEP复杂动力学的理解,而且突出了所提出的PINN框架在捕获和预测先进板结构动力学行为方面的有效性。这项研究为解决航空航天、土木和机械工程领域的动态问题提供了一个有希望的潜力。


Experimental and numerical study on the blast performance of the corrugated double steel plate concrete composite wallboard under blast loads

Chunfeng Zhao, Li Zhang, Honghao Ma, Jingfeng Wang, Xiaojie Li

doi:10.1016/j.tws.2024.111921

波纹双钢板混凝土组合墙板在爆炸荷载作用下爆破性能的试验与数值研究

The corrugated double steel plate concrete composite wallboard (CDSCW) exhibits superior axial compressive load-bearing capacity, lateral flexural stiffness, impact resistance, and seismic performance compared to the traditional reinforced concrete wallboard and plane double steel plate concrete composite wallboard (PDSCW). Therefore, it has great potential application in offshore engineering and military engineering. This study designs and fabricates two types of CDSCW specimens. Firstly, a comparative analysis is conducted to examine the damage patterns and dynamic responses of the two specimens under near-field explosion experiments. Secondly, the damage mechanisms and explosion response of CDSCW and PDSCW subjected to close-in explosions are numerically investigated by using ANSYS/LS-DYNA, and the results are then compared with experimental findings. Parameter analysis is performed to assess the influence of concrete thickness, steel plate thickness, and explosive charge on the blast resistance of CDSCWs. Furthermore, a nonlinear resistance equation and an equivalent single degree of freedom (ESDOF) theoretical model for simply supported beams is established to predict the dynamic response of CDSCWs under near-blast loads. This theoretical model considers the constitutive model of bilinear materials and the effect of plastic hinges. The reliability of the proposed theoretical model is verified by comparing the residual deflection of CDSCWs obtained from explosion tests with validated numerical simulation results. The results demonstrate that the CDSCWs, with the same concrete and component dimensions (length, width), exhibit greater flexural stiffness and superior energy dissipation capacity subjected to close-in explosion. Moreover, their blast resistance significantly surpasses that of PDSCWs. In particular, an increase in corrugation depth effectively improves the blast resistance of CDSCWs. The dynamic response equations, based on the established elastic-plastic model and primarily considering bending deformation of the components, precisely predict the dynamic response of simply supported CDSCWs under near-blast loads. consequently, these findings can provide a robust foundation for further research and the design of blast-resistant structures.

与传统的钢筋混凝土墙板和平面双钢板混凝土复合墙板(PDSCW)相比,波纹双钢板混凝土复合墙板(CDSCW)具有优越的轴压承载能力、横向抗弯刚度、抗冲击性和抗震性能。因此,它在海洋工程和军事工程中具有很大的应用潜力。本研究设计并制作了两种类型的CDSCW试件。首先,对比分析了两种试样在近场爆炸试验下的损伤形态和动力响应。其次,利用ANSYS/LS-DYNA软件对CDSCW和PDSCW在近距离爆炸作用下的损伤机理和爆炸响应进行了数值研究,并与实验结果进行了比较。通过参数分析,评价了混凝土厚度、钢板厚度、炸药装药对cdscw抗爆性能的影响。在此基础上,建立了简支梁的非线性阻力方程和等效单自由度(ESDOF)理论模型,用于预测简支梁在近爆炸荷载作用下的动力响应。该理论模型考虑了双线性材料的本构模型和塑性铰的影响。通过将爆炸试验得到的cdscw残余挠度与验证的数值模拟结果进行比较,验证了理论模型的可靠性。结果表明,在混凝土和构件尺寸(长、宽)相同的情况下,cdscw具有较大的抗弯刚度和较好的近距离爆炸消能能力。而且,它们的抗爆能力明显优于pdscw。特别是波纹深度的增加有效地提高了cdscw的抗爆能力。基于所建立的弹塑性模型,主要考虑构件的弯曲变形,建立的动力响应方程能够准确地预测简支梁结构在近爆炸荷载作用下的动力响应。因此,这些发现可以为进一步研究和设计防爆结构提供坚实的基础。


Significantly enhanced joint strength and fatigue life of aerospace composite joints by using novel PEEK/PPS woven meshes as joining agent

Dong Quan, Long Qin, Han Chen, Jia Liu, Jun Lin, Guiwei Dong, Guoqun Zhao

doi:10.1016/j.tws.2024.111926

采用新型PEEK/PPS编织网作为连接剂,可显著提高航空航天复合材料接头的连接强度和疲劳寿命

The development of advanced joining methods for carbon fibre/epoxy composites is critical for aerospace applications. Herein, advanced PEEK/PPS meshes were used to join carbon fibre/epoxy composites upon a novel co-curing process. The meshes were surface-activated upon an atmospheric plasma technique, which largely promoted the chemical interactions between the meshes and the composite epoxy matrix. The quasi-static joint strengths at both of 22 °C and 130 °C and fatigue loading resistance of the composite joints were evaluated using a single-lap joint test and the corresponding failure mechanisms were investigated. Encouragingly, the lap-shear strengths and fatigue resistance of the PEEK/PPS mesh-joined composites were larger than that of their counterparts bonded by an aerospace adhesive. Subsequent analysis on the failure surfaces proved PEEK/PPS fibre damage and epoxy crack were the main failure mechanisms of the PEEK/PPS co-cured joints. This work proposed a novel method for the production of robust aerospace joints by co-cure joining the composites using advanced PEEK/PPS meshes.

碳纤维/环氧复合材料的先进连接方法的发展对航空航天应用至关重要。本文采用新型共固化工艺,采用先进的PEEK/PPS网格连接碳纤维/环氧复合材料。采用大气等离子体技术对网格进行表面活化,极大地促进了网格与复合环氧基之间的化学相互作用。采用单搭接试验对复合材料接头在22℃和130℃下的准静态强度和抗疲劳载荷性能进行了评价,并对其失效机理进行了研究。令人鼓舞的是,PEEK/PPS网接复合材料的搭接剪切强度和抗疲劳性能比航空胶粘剂连接的复合材料大。对破坏表面的分析表明,PEEK/PPS纤维损伤和环氧裂缝是PEEK/PPS共固化接头的主要破坏机制。本文提出了一种利用先进的PEEK/PPS网格共固化连接复合材料制造坚固航空航天接头的新方法。


来源:复合材料力学仿真Composites FEM
ACTMechanicalLS-DYNASystemInspire振动疲劳复合材料非线性化学航空航天海洋理论爆炸材料仿生
著作权归作者所有,欢迎分享,未经许可,不得转载
首次发布时间:2024-11-14
最近编辑:1天前
Tansu
签名征集中
获赞 3粉丝 0文章 499课程 0
点赞
收藏
作者推荐

【新文速递】2024年4月10日固体力学SCI期刊最新文章

今日更新:Mechanics of Materials 1 篇,Thin-Walled Structures 4 篇Mechanics of MaterialsIn-plane elastic waves in piezoelectric metamaterials with Parity–Time symmetryPeng-Hui Li, Zi-Hao Miao, Yi-Ze Wangdoi:10.1016/j.mechmat.2024.105005具有奇偶-时间对称性的压电材料中的面内弹性波The propagation of in-plane waves in piezoelectric metamaterial involves the coupling of longitudinal (i.e. quasi–pressure), transverse (i.e. quasi–shear) and electric potential waves, which can result in different exotic phenomena. In this study, the stiffness matrix method is used to analyze the dispersion relation, which contains anomalous propagation characteristics. With the coupling of electric potential, the frequency spectrum of in–plane wave shows new characteristics. The exceptional point caused by non–Hermitian operator that does not exist before also appears when the vertical wave number is imaginary. The oblique incidence of the in–plane wave at the interface between a homogeneous medium and phononic crystal can excite multiple refraction modes which include the negative refraction. The normal mode decomposition is developed to study the in-plane incidence of piezoelectric metamaterial and then the averaged Poynting vector is applied to obtain the refraction angle. Moreover, the defect layer is introduced into the phononic crystals to study the transmission coefficients with two different symmetrical arrangements. When the balanced gain and loss are considered in the metamaterial, the Parity–Time symmetry appears and brings in pairs of exceptional points to achieve a complete transmission with a unidirectional zero reflection.平面波在压电超材料中的传播涉及到纵波(即准压力波)、横波(即准剪切波)和电位波的耦合,从而导致不同的奇异现象。本文采用刚度矩阵法分析了包含异常传播特性的色散关系。随着电势的耦合,面内波的频谱呈现出新的特征。当纵波数为虚数时,以前不存在的非厄米算子引起的异常点也会出现。平面波在均匀介质和声子晶体界面处的斜入射可以激发包括负折射在内的多种折射模式。采用正交模态分解方法研究了压电材料的面内入射,并利用平均坡印亭矢量计算了折射角。此外,在声子晶体中引入缺陷层,研究了两种不同对称排列方式下的透射系数。当在超材料中考虑平衡增益和损耗时,奇偶-时间对称性出现并引入对异常点,从而实现单向零反射的完全传输。Thin-Walled StructuresBuckling strengths of Cold-Formed Built-up Cruciform Section Columns under axial compressionJelena Dobrić, Nina Gluhović, Nenad Fric, Xiongfeng Ruan, Marina Bock, Barbara Rossidoi:10.1016/j.tws.2024.111879冷弯组合十字形截面柱轴压屈曲强度研究This paper describes experiments addressing the buckling and collapse behaviour of cold-formed stainless steel cruciform section columns. Doubly symmetrical flanged cruciform section columns were built using six individual press-braked plain channels made of austenitic grade EN 1.4307 assembled back-to-back. Three different column lengths were tested – namely, short (600 mm), intermediate (1200 mm) and long (2400 mm) lengths, and two channel geometries were used in all tests – with cross-section depths of 200 mm and 100 mm. Tests were carried out under pure axial compression and with fixed end support conditions. Tests were repeated two times for each length. It was observed that the buckling patterns were affected both by the global slenderness and by the spacing between the fasteners. Stocky columns experienced local buckling of the individual channel sections. The plastic failure mechanism was dependent on the fasteners spacing. Intermediate slenderness columns were characterised by interaction between global torsional buckling and local buckling whereas more slender columns failed predominantly through torsional buckling. For the latter, the spacing between the fasteners had a minor influence on the ultimate capacity.本文介绍了冷弯不锈钢十字形截面柱的屈曲和破坏行为的实验研究。双对称法兰十字形截面柱由6个独立的压制动平面通道组成,这些通道由奥氏体等级EN 1.4307背对背组装而成。测试了三种不同长度的柱子——即短(600毫米)、中间(1200毫米)和长(2400毫米)长度,所有测试中都使用了两种通道几何形状——横截面深度分别为200毫米和100毫米。试验是在纯轴向压缩和固定端支条件下进行的。每个长度重复测试两次。结果表明,屈曲模式受整体长细和紧固件间距的影响。粗壮柱经历了个别通道段的局部屈曲。塑性破坏机制与紧固件间距有关。中等细度柱的破坏主要是整体扭转屈曲和局部屈曲的相互作用,而较细度柱的破坏主要是扭转屈曲。对于后者,紧固件之间的间距对极限承载力的影响较小。Improvement of interfacial thermal contact conductance and mechanical performance of metal-composite joint via controlling anchoring structuresZiwei Feng, Xueyan Zhang, Chunlin Qin, Jianhui Su, Caiwang Tan, Hongyun Zhao, Bo Chen, Xiaoguo Songdoi:10.1016/j.tws.2024.111882通过控制锚固结构改善金属复合材料接头的界面热接触导率和力学性能This study discussed the interfacial heat conduction in depth during the laser welding of metal to composite by constructing rough morphologies adopting the laser ablation method. Results revealed the interface temperature was significantly elevated, reaching 375°C under a line spacing of 0.4mm, which was higher 45°C than without treatment. For one thing, the increased surface roughness reduced the heat loss and caused the heat concentration at the interface. For another thing, the expanded contact area improved the wettability and strengthened the physical adsorption, and the highest work of adhesion was increased to 49mJ/mm2, reaching 1.3 times of those without treatment. The thermal contact resistance was thus decreased, which was confirmed by finite element analysis. Finally, the maximum tensile-shear force and strength of joints were 4171N and 23MPa, which was 3.7 times and 3.9 times of those joints without treatment. Additionally, the fatigue life and anti-salty corrosion of joints were improved, providing an effective method for further application.本文采用激光烧蚀的方法,对金属与复合材料激光焊接过程中的界面热传导进行了深入的研究。结果表明,在线间距为0.4mm时,界面温度显著升高,达到375℃,比未处理时高45℃。一方面,表面粗糙度的增加减少了热损失,引起了界面处的热集中。另一方面,接触面积的扩大提高了润湿性,增强了物理吸附,最高粘附功提高到49mJ/mm2,达到未处理的1.3倍。通过有限元分析证实了接触热阻的减小。最后,节理的最大拉剪力和强度分别为4171N和23MPa,分别是未处理节理的3.7倍和3.9倍。提高了接头的疲劳寿命和抗盐腐蚀性能,为进一步推广应用提供了有效的方法。Coupled vibration analysis of partially liquid-filled cylindrical shells with internal horizontal platesSonghao Chen, Yueyang Han, Xiang Zhu, Tianyun Li, Kexin Zhongdoi:10.1016/j.tws.2024.111884内水平板部分充液圆柱壳的耦合振动分析A semi-analytical method is proposed to analyze the coupling vibration characteristics of a partially liquid-filled cylindrical shell with an internal horizontal plate, considering the sloshing effect of the free liquid surface. Two coordinate systems are set at the midpoint of the free surface and the geometric center of the cylindrical shell's cross-section, respectively. The Flügge shell and Kirchhoff-love theories are adopted to establish the motion equations of the cylindrical shell and the plate on the structural coordinate system, respectively, in which the displacement functions are expressed with the wave propagation method. The liquid velocity potential functions are described in the symmetrical/anti-symmetrical forms based on the liquid coordinate system, which satisfies Laplace's equation. The coupling governing equations are deduced by the continuous conditions of force and displacement on the fluid-shell interface. After that, the coupling vibration responses can be solved. The accuracy of the present method is verified by the comparison with the finite element method. The influences of the structures’ parameters and liquid effect on the coupling system's free and forced vibration behaviors are discussed, and the sloshing behaviors of the internal fluid are also discussed under different parameters.考虑自由液面晃动效应,提出了一种半解析法分析内水平板部分充液圆柱壳的耦合振动特性。在自由表面的中点和圆柱壳截面的几何中心分别设置两个坐标系。采用fl<s:1> gge壳理论和Kirchhoff-love理论分别建立了柱壳和板在结构坐标系上的运动方程,其中位移函数用波传播法表示。在满足拉普拉斯方程的液体坐标系下,以对称/反对称形式描述了液体的速度势函数。根据流壳界面上力和位移的连续条件,推导了耦合控制方程。然后求解耦合振动响应。通过与有限元法的比较,验证了该方法的准确性。讨论了结构参数和液体效应对耦合系统自由和强制振动特性的影响,并讨论了不同参数下内部流体的晃动特性。High-frequency vibration analysis of panels under aerothermoelastic effects in supersonic airflow by an energy finite element methodZhaolin Chen, Zhichun Yang, Yingsong Gu, Xiaochen Wangdoi:10.1016/j.tws.2024.111885超声速气流中热弹性作用下面板高频振动的能量有限元分析Vibration analysis of heated panels in supersonic airflow under aerothermoelastic effects has attracted wide attention, but the high-frequency vibration characteristics have not yet been thoroughly studied. A novel energy finite element method (EFEM), which can consider the aerothermoelastic effects, is proposed to investigate the high-frequency vibration response of heated panels in supersonic airflow. By separating the high-frequency response from the static or low-frequency aerothermoelastic response, a linearized high-frequency forced vibration equation is derived from the nonlinear motion equation of the panel. On this basis, the effects of in-plane and aerodynamic forces on the propagation properties of elastic waves in the panel are analyzed theoretically. By introducing these effects and the equivalent loss factors of elastic waves into EFEM theory, the energy density governing equation and the corresponding energy finite element model are established. Through numerical comparative studies, it is demonstrated that the proposed EFEM can well capture the aerothermoelastic effects and efficiently predict the high-frequency vibration response of heated panels in supersonic airflow. Particularly, the present EFEM is valid for panels in different aerothermoelastic states such as thermal buckling and flutter. In addition, the effects of aerothermoelasticity on the high-frequency vibration response are studied in detail, and the corresponding effect mechanism is revealed.热弹性作用下加热板在超声速气流中的振动分析已引起广泛关注,但其高频振动特性尚未得到深入研究。提出了一种考虑气动热弹性效应的能量有限元方法来研究加热板在超声速气流中的高频振动响应。通过将面板的高频响应与静态或低频气动热弹性响应分离,从面板的非线性运动方程推导出线性化的高频强迫振动方程。在此基础上,从理论上分析了面内力和气动力对弹性波在面板中传播特性的影响。将弹性波的这些影响和等效损失因子引入有限元理论,建立了弹性波的能量密度控制方程和相应的能量有限元模型。数值对比研究表明,本文提出的有限元方法能够很好地捕捉到热弹性效应,并能有效地预测加热板在超声速气流中的高频振动响应。特别地,本有限元法适用于不同气动热弹性状态下的板,如热屈曲和颤振。此外,还详细研究了气动热弹性对高频振动响应的影响,揭示了其影响机理。来源:复合材料力学仿真Composites FEM

未登录
还没有评论
课程
培训
服务
行家
VIP会员 学习 福利任务 兑换礼品
下载APP
联系我们
帮助与反馈